Super Duplex UNS S32750/S32760 Washers
DSS WNR. No. 1.4410 Lock Washers, ASTM A479 SDSS UNS S32750 Star Washer, Super Duplex Stainless Steel UNS S32760 Washers, Super Duplex Grade S32750 Spring Washers Suppliers in India.
Ranfit Metal & Alloys is a known supplying and trading firm that offers a wide range of Super Duplex 2507 Washers, which is spark resistant and non-magnetic to -200 Degree F. Super Duplex 2507 Flat Washers is well-suited for marine shafts in stagnant or slow-moving sea water. Super Duplex 2507 Lock Washers has excellent corrosion resistance in marine environments. Super Duplex 2507 Sealing Washers develops a magnetic layer on the surface of the material during processing. The aluminum and titanium additions in Super Duplex 2507 Split Washers are responsible for age hardening in this alloy. Super Duplex 2507 Slot Washers is used in Chemical Industry (valves and pumps) and Paper Production (doctor blades and scrapers). Super Duplex 2507 Machine Washers has good fatigue and corrosion fatigue resistance.
Super Duplex 2507 Star Washers has corrosion resistance in an extensive range of marine and chemical environments. The magnetic film can be removed by pickling or bright dipping in acid, and the nonmagnetic properties of Super Duplex 2507 Spring Washers will be restored. Small additions of aluminum and titanium form Super Duplex 2507 Wire Spring Washers with the same corrosion resistance but with much greater strength due to gamma prime formation on aging. Super Duplex 2507 Flat Spring Washers can be fabricated by using standard commercial procedures. Fouling may occur in Alloy 2507 Washers followed by pitting but this pitting slows down after a fairly rapid initial attack.
Super Duplex 2507 Spring Washer, Super Duplex Steel UNS S32750 Round Washers, Super Duplex Stainless Steel UNS S32760 Slot Washers, ASME SA479 SDSS UNS S32750 Machine Washers Supplier & Exporter in India.
Super Duplex Steel UNS S32750/S32760 Washers Specification
| Grade | Super Duplex Steel 2507 (UNS S32750/S32760) |
|---|---|
| Super Duplex Steel UNS S32750/S32760 Washer size | M02 to M33, Custom Sizes |
| Super Duplex Steel UNS S32750/S32760 Washers Length | 3 mm to 200 mm |
| Super Duplex Steel UNS S32750/S32760 Washer | UNF, BSW, BSF, METRIC, UNC, or as required |
| Standard of Washers | DIN 125A, DIN 125B, DIN 127B, DIN 137B, DIN 6797A, DIN 6797J, ISO 7089, DIN 7980, DIN 127 B, IS 2016, ASTM F436M, ASME B18.13, ASME B18.21.1, ASME B18.22.1, ASME B18.23.1 |
| Form of Washers | Hex, Threading, Square, Round as per Gauge Etc. |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin, etc. |
| Super Duplex Steel UNS S32750/S32760 Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Popular Types of Washer | Star Washer, Flat Washer, Lock Washer, Slot Washer, Machine Washer, Sealing Washer, Split Washer, Dome Tooth Washer, Countersunk Washer, Tab Washers, Spherical Washer, Square Washer, Spring Washer, Round Washers, Square Washers etc. |
| Super Duplex Steel UNS S32750/S32760 Washers Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate of Washers | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive of Washers | Six-Lobe, Phillips, Phillips/Slot, Slotted etc |
| Packing of Washers | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating | Ptfe Coated Washers Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Washers finishing | Coatings & Finishes : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Super Duplex Steel UNS S32750/S32760 Washers Equivalent Grades
| Super Duplex | Common Name | Related Specifications | ||
|---|---|---|---|---|
| European DIN | UNS | ASTM/ASME | ||
| Super Duplex Steel | SAF 2507® | 1.4410 | S32750/S32760 | A479 / SA479 / F53 |
Chemical Composition of Super Duplex Steel UNS S32750/S32760 Washers
| Grade | C | N | P | Si | Mn | Mo | Fe | Cr | S | Ni |
| S32750/S32760 | 1.0 | 0.03 | 0.02 | 2.0 | 3.0 – 3.5 | 22.0 – 23.0 | 0.03 | 4.5 – 6.5 | 0.14 – 0.2 | Bal |
Mechanical Properties of Super Duplex Steel UNS S32750/S32760 Washers
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) | Hardness Rockwell C (HR C) |
| UNS S32750/S32760 | 795 | 550 | 15 | 32max |
Types of Super Duplex Steel UNS S32750/S32760 Washers
Super Duplex Steel UNS S32750/S32760 Machine Washers
Super Duplex Steel UNS S32750/S32760 Flat Washers
Super Duplex Steel UNS S32750/S32760 Star Washers
Super Duplex Steel UNS S32750/S32760 Sealing Washers
Super Duplex Steel UNS S32750/S32760 Lock Washer
Super Duplex Steel UNS S32750/S32760 Split Lock Washer
Super Duplex Steel UNS S32750/S32760 Belleville Washers
Super Duplex Steel UNS S32750/S32760 Cup Washers
Super Duplex Steel UNS S32750/S32760 Tab Washers
Super Duplex Steel UNS S32750/S32760 Taper Washers
Super Duplex Steel UNS S32750/S32760 Tooth Lock Washers
Super Duplex Steel UNS S32750/S32760 Bimetal Washers
Super Duplex Steel UNS S32750/S32760 Washers Forms & Availability
| Products | Size | |
|---|---|---|
| Super Duplex Steel UNS S32750/S32760 Flat Washer | Super Duplex Steel UNS S32750/S32760 Split Lock Washer | M02 to M33, Custom Sizes |
| Super Duplex Steel UNS S32750/S32760 Spring Wave Washer | Super Duplex Steel UNS S32750/S32760 External Tooth Lock Washer | |
| Super Duplex Steel UNS S32750/S32760 Internal Tooth Lock Washer | Super Duplex Steel UNS S32750/S32760 Weight Chart (Plain Washer) | |
| Super Duplex Steel UNS S32750/S32760 Square Section Spring Washer | Super Duplex Steel UNS S32750/S32760 Flat Section Spring Washer | |
| Super Duplex Steel UNS S32750/S32760 Hardened Washer | Super Duplex Steel UNS S32750/S32760 Hardened Steel Washer | |
| Super Duplex Steel UNS S32750/S32760 Lock Washers | Super Duplex Steel UNS S32750/S32760 Plain Washers | |
| Super Duplex Steel UNS S32750/S32760 Beveled Washers | Super Duplex Steel UNS S32750/S32760 Allen Star Washers | |
ANSI And/Or ASME Standards Washers (Inch Series)
| Description | Standard | Measurement System |
|---|---|---|
| Lock Washers | ANSI/ASME B18.21.1 | Inch Series |
| Lock Washers | ANSI/ASME B18.21.1M | Metric |
| Plain Washers | ANSI/ASME B18.22.1 | Inch Series |
| Plain Washers | ANSI/ASME B18.22M | Metric |
| Heavy Helical Spring Lock Washers | ANSI/ASME B18.21.1 | Inch Series |
| Extra Duty Helical Spring Lock Washers | ANSI/ASME B18.21.1 | Inch Series |
| High Collar Helical Spring Lock Washers | ANSI/ASME B18.21.1 | Inch Series |
| Internal Tooth Lock Washers | ANSI/ASME B18.21.1 | Inch Series |
| Heavy Internal Tooth Lock Washers | ANSI/ASME B18.21.1 | Inch Series |
| External Tooth Lock Washers | ANSI/ASME B18.21.1 | Inch Series |
| Countersunk External Tooth Lock Washers | ANSI/ASME B18.21.1 | Inch Series |
| Internal External Tooth Lock Washers | ANSI/ASME B18.21.1 | Inch Series |
| Tab Washers With Long Tab | DIN 93 | Metric |
| Plain Flat Washers | DIN 125A / ISO 7089 | Metric |
| Plain Flat Washers | DIN 125B / ISO 7090 | Metric |
| Plain Flat Washers Without Chamfer | DIN 126 | Metric |
| Spring Lock Washers, Form A | DIN 127A | Metric |
| Spring Lock Washers, Form B | DIN 127B | Metric |
| Curved Spring Lock Washers | DIN 128 A | Metric |
| Waved Spring Lock Washers | DIN 128 B | Metric |
| Tab Lock Washers With External Tab | DIN 432 | Metric |
| Square Taper Washers | DIN 434 | Metric |
| Square Bevel Washers | DIN 435 | Metric |
| Square Washers | DIN 436 | Metric |
| Large Plain Washers for Wood Construction | DIN 440 / ISO 7094 | Metric |
| Internal Tab Washers | DIN 462 | Metric |
| Tab Washers with Long Tab and Wing | DIN 463 | Metric |
| Flat Washers for Clevis Pins | DIN 1440 / ISO 8738 | Metric |
| Disc Spring Washers | DIN 2093 | Metric |
| Conical Spring Washers (Belleville Type) | DIN 6796 | Metric |
| Conical Spring Washers | ISO 10670 | Metric |
| Plain Flat Washers | ISO 7091 | Metric |
| Plain Washers for Cheese Head Screws | ISO 7092 | Metric |
| Large Plain Washers OD=3D | ISO 7093 | Metric |
| Round Machined Washers | IS 2016 | Metric |
| Round Punched Washers for Hexagonal Bolts | IS 2016 | Metric |
| Round Punched Washers for Cheese Head Screws | IS 2016 | Metric |
| Spring Lock Washers | IS 6735 | Metric |
Property Class
| For Bolts & Screws | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H |
| For Nuts | A2-70, A2-80, A4-70, A4-80, F594C, F594D, F594G, F594H, A2-035, A4-040 |
| For SHCS | F837B, F837C, F837E, F837 |
| For Threaded Rods | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2 |
Super Duplex Steel UNS S32750/S32760 Flat Washer Dimension Chart
| Size | Inside Diameter | Outside Diameter | Thickness |
|---|---|---|---|
| #2 | 3/32" | 1/4" | .020" |
| #4 | 1/8" | 5/16" | 1/32" |
| #8 | 3/16" | 7/16" | 3/64" |
| #10 | 7/32" | 1/2" | 3/64" |
| #6 | 5/32" | 3/8" | 3/64" |
| 1/4 | 9/32" | 5/8" | 1/16" |
| 3/8 | 13/32" | 13/16" | 1/16" |
| 7/16 | 15/32" | 59/64" | 1/16" |
| 1/2 | 17/32" | 1-1/16" | 3/32" |
| 9/16 | 19/32" | 1-3/16" | 3/32" |
| 5/16 | 11/32" | 11/16" | 1/16" |
| 1-3/4 | 1-7/8" | 4" | 3/16" |
| 5/8 | 21/32" | 1-5/16" | 3/32" |
| 3/4 | 13/16" | 1-1/2" | 9/64" |
| 7/8 | 15/16" | 1-3/4" | 9/64" |
| 1" | 1-1/16" | 2" | 9/64" |
| 1-1/8 | 1-3/16" | 2-1/4" | 9/64" |
| 1-1/4 | 1-5/16" | 2-1/2" | 5/32" |
| 1-1/2 | 1-7/16" | 3" | 3/16" |
| 1-5/8 | 1-3/4" | 3-3/4" | 3/16" |
| 2 | 2-1/8" | 4-1/2" | 3/16" |
Super Duplex Steel UNS S32750/S32760 Plain Washer Dimension
| Size | Inside Diameter | Outside Diameter | Thickness |
|---|---|---|---|
| 3/16 | 1/4" | 9/16" | 3/64" |
| 1/4 | 5/16" | 3/4" | 1/16" |
| 3/8 | 7/16" | 1" | 5/64" |
| 7/16 | 1/2" | 1-1/4" | 5/64" |
| 1/2 | 9/16" | 1-3/8" | 7/64" |
| 9/16 | 5/8" | 1-1/2" | 7/64" |
| 5/8 | 11/16" | 1-3/4" | 9/64" |
| 3/4 | 13/16" | 2" | 5/32" |
| 5/16 | 3/8" | 7/8" | 5/64" |
| 7/8 | 15/16" | 2-1/4" | 1/64" |
| 1 | 1-1/16" | 2-1/2" | 11/64" |
| 1-1/8 | 1-1/4" | 2-3/4" | 11/64" |
| 1-1/4 | 1-3/8" | 3" | 11/64" |
| 1-3/8 | 1-1/2" | 3-1/4" | 3/16" |
| 1-5/8 | 1-3/4" | 3-3/4" | 3/16" |
| 1-3/4 | 1-7/8" | 4" | 3/16" |
| 2 | 2-1/8" | 4-1/2" | 3/16" |
| 2-1/2 | 2-5/8" | 4-1/2" | 3/16" |
| 3 | 3-1/8" | 5-1/2" | 9/32" |
| 1-1/2 | 1-5/8" | 3-1/2" | 3/16" |
Super Duplex Steel UNS S32750/S32760 Washers Sizes
| Size | USS | SAE | ||||
|---|---|---|---|---|---|---|
| Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
Inside Diameter (A) |
Outside Diameter (B) |
Thickness (C) |
|
| #2 | - | - | - | 3/32" | 1/4" | 0.020" |
| #4 | - | - | - | 1/8" | 5/16" | 0.032" |
| #6 | - | - | - | 5/32" | 3/8" | 0.049" |
| #8 | - | - | - | 3/16" | 7/16" | 0.049" |
| #10 | - | - | - | 7/32" | 1/2" | 0.049" |
| #12 | - | - | - | 1/4" | 9/16" | 0.065" |
| 1/4" | 5/16" | 0.734" | 0.065" | 9/32" | 5/8" | 0.065" |
| 5/16" | 3/8" | 7/8" | 0.083" | 11/32" | 11/16" | 0.065" |
| 3/8" | 7/16" | 1" | 0.083" | 13/32" | 13/16" | 0.065" |
| 7/16" | 1/2" | 1-1/4" | 0.083" | 15/32" | 15/16" | 0.065" |
| 1/2" | 9/16" | 1-3/8" | 0.109" | 17/32" | 1-1/16" | 0.095" |
| 9/16" | 5/8" | 1-15/32" | 0.109" | 19/32" | 1-5/32" | 0.095" |
| 5/8" | 11/16" | 1-3/4" | 0.134" | 21/32" | 1-5/16" | 0.095" |
| 3/4" | 13/16" | 2" | 0.148" | 13/16" | 1-15/32" | 0.134" |
| 7/8" | 15/16" | 2-1/4" | 0.165" | 15/16" | 1-3/4" | 0.134" |
| 1" | 1-1/16" | 2-1/2" | 0.165" | 1-1/16" | 2" | 0.134" |
| 1-1/8" | 1-1/4" | 2-3/4" | 0.165" | - | - | - |
| 1-1/4" | 1-3/8" | 3" | 0.165" | - | - | - |
| 1-3/8" | 1-1/2" | 3-1/4" | 0.180" | - | - | - |
| 1-1/2" | 1-5/8" | 3-1/2" | 0.180" | - | - | - |
| 1-5/8" | 1-3/4" | 3-3/4" | 0.180" | - | - | - |
| 1-3/4" | 1-7/8" | 4" | 0.180" | - | - | - |
| 2" | 2-1/8" | 4-1/2" | 0.213" | - | - | - |
321 Stainless Steel Washers Weight Chart
| APPROX. WEIGHT IN KGS FOR 100 NOS | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| SIZE | PLAIN PUNCHED WASHER IS:2016 |
HEAVY WASHER IS:6610 |
MACHINED WASHER IS:2016 |
SQUARE | TAPER | WASHERS | SPRING WASHER FLAT SECTION IS:3063-72 | SPRING WASHER SQUARE SECTION IS:6735-72 DIN : 7980 |
Size (Inches) | PLAIN PUNCHED WASHER BS:3410 TABLE 7 |
|||
| MACHINED | HIGH STRENGTH FRICTION GRIP |
||||||||||
| FOR CHANNELS IS:5372-75 |
FOR I-BEAM IS:5374-75 |
TYPE-B (CHANNELS) IS : 6649-85 |
TYPE-C ( I-BEAMS ) IS : 6649-85 |
||||||||
| M-3 | 0.01 | 0.01 | |||||||||
| M-4 | 0.02 | 0.02 | |||||||||
| M-5 | 0.04 | 0.04 | 0.03 | 0.03 | |||||||
| M-6 | 0.11 | 0.11 | 0.08 | 0.04 | 1/4" | 0.21 | |||||
| M-8 | 0.20 | 0.21 | 1.10 | 1.20 | 0.16 | 0.11 | 5/16" | 0.35 | |||
| M-10 | 0.39 | 1.60 | 0.40 | 1.00 | 1.10 | 0.25 | 0.20 | 3/8" | 0.48 | ||
| M-12 | 0.58 | 1.90 | 0.62 | 2.00 | 2.20 | 2.00 | 1.80 | 0.38 | 0.23 | 1/2" | 1.07 |
| M-14 | 0.82 | 0.60 | 0.38 | ||||||||
| M-16 | 1.06 | 2.90 | 1.13 | 3.40 | 3.75 | 9.00 | 8.50 | 0.89 | 0.59 | 5/8" | 1.85 |
| M-18 | 1.27 | 0.97 | 0.66 | ||||||||
| M-20 | 1.64 | 4.40 | 1.72 | 5.80 | 6.70 | 8.50 | 8.00 | 1.52 | 1.23 | 3/4" | 2.91 |
| M-22 | 1.75 | 7.50 | 7.00 | 1.65 | 1.36 | 7/8" | 4.27 | ||||
| M-24 | 3.11 | 6.30 | 3.30 | 13.50 | 16.00 | 6.50 | 6.00 | 2.62 | 1.81 | 1" | 6.13 |
| M-27 | 3.94 | 8.00 | 4.23 | 12.50 | 15.00 | 12.00 | 11.50 | 2.87 | 2.06 | 1.1/8" | 7.69 |
| M-30 | 5.05 | 10.10 | 5.36 | 16.50 | 18.70 | 17.50 | 16.00 | 4.43 | 3.20 | 1.1/4" | 9.90 |
| M-33 | 7.10 | 12.00 | 7.54 | 21.00 | 23.50 | 23.00 | 22.50 | 6.30 | 3.50 | ||
| M-36 | 8.73 | 14.60 | 9.20 | 25.50 | 29.20 | 26.50 | 26.00 | 6.73 | 5.25 | 1.1/2" | 17.24 |
| M-39 | 12.60 | 16.70 | 13.30 | 28.30 | 34.50 | 7.17 | 5.61 | ||||
| M-42 | 17.50 | 20.10 | 18.30 | 11.10 | 8.00 | ||||||
| M-45 | 21.20 | 22.20 | 22.00 | 11.70 | 8.53 | ||||||
| M-48 | 28.40 | 26.00 | 29.40 | 12.30 | 9.00 | 2" | 27.78 | ||||
| M-52 | 31.90 | 33.00 | 18.20 | ||||||||
| M-56 | 47.90 | 19.30 | |||||||||
| M-60 | 51.60 | 20.30 | |||||||||
| M-64 | 55.40 | 21.80 | |||||||||
| M-68 | 57.40 | ||||||||||
| M-72 | 63.40 | 24.00 | |||||||||
Other Types of Super Duplex Steel UNS S32750/S32760 Washers
| ASTM A479 SDSS UNS S32750 Machined Washers | Super Duplex Steel UNS S32760 Fender Washers |
| Super Duplex Steel UNS S32760 Square Washers | ASTM A479 SDSS UNS S32750 Punched Washer |
| Super Duplex 2507 Tab Washers | Super Duplex Stainless Steel UNS S32750 Round Washers |
| Super Duplex Stainless Steel UNS S32750 Lock Washer | Super Duplex SAF 2507 Countersunk Washers |
| SDSS DIN 1.4410 Split /Lock Washer | Super Duplex Grade S32760 Flat Washers |
| Super Duplex Grade S32760 Machined Washers | SDSS DIN 1.4410 Customized Washer |
| ASME SA479 SDSS UNS S32750 Spherical Washers iin Mumbai | S32750 Super Duplex Steel Industrial Washers Supplier in India |
| S32750 Super Duplex Steel Dock Washer | ASME SA479 SDSS UNS S32750 Customized Washer |
| Super Duplex Steel UNS S32760 Split Washer | S32750 Super Duplex Steel Tooth Washer Manufacturer |
| S32750 Super Duplex Steel Hillside Washers Stockholder | Super Duplex Steel UNS S32760 Customized Washer |