Super Duplex Steel UNS S32750 & S32760 Bolts
SDSS UNS S32750 Square Bolts, Super Duplex Steel UNS S32760 Half Threaded Bolts, S32750 Super Duplex Steel T-Bolts, Super Duplex Grade S32760 Structural Bolt Suppliers in India.
Ranfit Metal & Alloys is a known supplying and distributing firm that offers a wide range of Super Duplex 2507 Bolts, which has excellent strength and toughness levels. Super Duplex 2507 Hex Head Bolts has found to be resistant to a sour-gas environment. Low corrosion rates in sea water make Super Duplex 2507 Square Bolts suitable for marine service. A useful characteristic of Super Duplex 2507 U-Bolts is that it is virtually nonmagnetic, even at quite low temperatures. Heat treatment of Super Duplex 2507 Eye Bolts may involve solution and process annealing, followed by age hardening. Material strength and hardness in Super Duplex 2507 T-Bolts is further enhanced through age hardening. Super Duplex 2507 Hex Bolts has high tensile properties up to about 650 Degree C (1200 Degree F).
Super Duplex 2507 Lag Bolts has excellent mechanical properties from sub-zero temperatures up to about 480 Degree C. The melting range of Super Duplex 2507 Counter Sunk Bolts is 2400 Degree F - 2460 Degree F. The effect is particularly noticeable on Super Duplex UNS S32750 Bolts where there is a high ratio of surface to weight. Super Duplex UNS S32760 Bolts is commonly used in applications with highly corrosive conditions. Pitting in Stainless 2507 Bolts may occur in stagnant waters but the rate of pitting slows after initial attack. Alloy 2507 Bolts has the combination of very low corrosion rates in high-velocity sea water and high strength.
Super Duplex Steel UNS S32750 Structural Bolts, Super Duplex Stainless Steel S32760 Hex Head Bolts, SDSS DIN 1.4410 Hex Head Bolt, SAF 2507 Flange Bolts Supplier & Exporter in India.
Super Duplex Steel UNS S32750 & S32760 Bolts Specification
| Grade | Super Duplex Steel 2507 (UNS S32750/S32760) |
|---|---|
| Super Duplex Steel UNS S32750 & S32760 Bolt size | M 02 to M 160, Custom Sizes |
| Super Duplex Steel UNS S32750 & S32760 Bolts Length | 3 mm to 200 mm |
| Super Duplex Steel UNS S32750 & S32760 Bolt | UNF, BSW, BSF, METRIC, UNC, or as required |
| Standard of Super Duplex Steel UNS S32750 & S32760 Bolts | IS1364, ISO 4014, ISO 4017, DIN 933, DIN 931, BS 1083, BS 1768, ASME B18.2.1, JIS B1180, DIN 558, ISO 4018, DIN-EN14399-4, DIN 601, ISO 4016, CSN 21301, EU 24016, DIN 7968, DIN7990, ASME B18.2.1, B18.5 |
| Form of Super Duplex Steel UNS S32750 & S32760 Bolts | Hex, Threading, Square, Round as per Gauge Etc. |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin, etc. |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Popular Types of Bolts | Hex Bolts, Flange Bolts, Hex Head Bolts, Lag Bolts, Square Bolts, Eye Bolts, U Bolts, T Bolts, Counter sunk Bolts etc. |
| Super Duplex Steel UNS S32750 & S32760 Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate of Bolts | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive of Bolts | Six-Lobe,Phillips,Phillips/Slot, Slotted etc |
| Packing of Bolts | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating | Ptfe Coated Bolts Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Super Duplex Steel UNS S32750 & S32760 Bolts finishing | Coatings & Finishes : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Super Duplex Steel UNS S32750 & S32760 Bolts Equivalent Grades
| Super Duplex | Common Name | Related Specifications | ||
|---|---|---|---|---|
| European DIN | UNS | ASTM/ASME | ||
| Super Duplex Steel | SAF 2507® | 1.4410 | S32750/S32760 | A479 / SA479 / F53 |
Chemical Composition of Super Duplex Steel UNS S32750 & S32760 Bolts
| Grade | C | N | P | Si | Mn | Mo | Fe | Cr | S | Ni |
| S32750/S32760 | 1.0 | 0.03 | 0.02 | 2.0 | 3.0 – 3.5 | 22.0 – 23.0 | 0.03 | 4.5 – 6.5 | 0.14 – 0.2 | Bal |
Mechanical Properties of Super Duplex Steel UNS S32750 & S32760 Bolts
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) | Hardness Rockwell C (HR C) |
| UNS S32750/S32760 | 795 | 550 | 15 | 32max |
Types of Super Duplex Steel UNS S32750 & S32760 Bolts
Super Duplex Steel UNS S32750 & S32760 Hollow Allen Bolts
Super Duplex Steel UNS S32750 & S32760 Anchor Bolts
Super Duplex Steel UNS S32750 & S32760 Hex Bolts
Super Duplex Steel UNS S32750 & S32760 Allen Cap Bolts
Super Duplex Steel UNS S32750 & S32760 Flanged Bolts
Super Duplex Steel UNS S32750 & S32760 Lag Bolts
Super Duplex Steel UNS S32750 & S32760 Counter Sunk Bolts
Super Duplex Steel UNS S32750 & S32760 J Bolts
Super Duplex Steel UNS S32750 & S32760 U Bolts
Super Duplex Steel UNS S32750 & S32760 Square Bolts
Super Duplex Steel UNS S32750 & S32760 Carriage Bolts
Super Duplex Steel UNS S32750 & S32760 Long Eye Bolts
Super Duplex Steel UNS S32750 & S32760 Bolts Forms & Availability
| Products | Size | |
|---|---|---|
| Super Duplex Steel UNS S32750 & S32760 Heavy Hex Bolts | Super Duplex Steel UNS S32750 & S32760 Hollow Hex Bolts | M 02 to M 160, Custom Sizes |
| Super Duplex Steel UNS S32750 & S32760 Hollow Allen Bolts | Super Duplex Steel UNS S32750 & S32760 Machine Bolts | |
| Super Duplex Steel UNS S32750 & S32760 Socket Head Bolts | Super Duplex Steel UNS S32750 & S32760 Hex Flange Bolts | |
| Super Duplex Steel UNS S32750 & S32760 Eye Bolts | Super Duplex Steel UNS S32750 & S32760 Lag Bolts | |
| Super Duplex Steel UNS S32750 & S32760 J Bolts | Super Duplex Steel UNS S32750 & S32760 U Bolts | |
| Super Duplex Steel UNS S32750 & S32760 Shoulder Bolts | Super Duplex Steel UNS S32750 & S32760 Elevator Bolts | |
| Super Duplex Steel UNS S32750 & S32760 Hanger Bolts | Super Duplex Steel UNS S32750 & S32760 Allen Bolts | |
ASTM F468 Fasteners Standard
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 | |||
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
ANSI And/Or ASME Standards Bolts (Inch Series)
| Description | Standard | Measurement System |
|---|---|---|
| Square & Hex Head Bolts | ANSI/ASME B18.2.1 | Inch Series |
| Hex Head Bolts | ANSI/ASME B18.2.3.5M | Metric |
| Heavy Hex Bolts | ANSI/ASME B18.2.3.6M | Metric |
| Heavy Hex Structural Bolts | ANSI/ASME B18.2.3.7M | Metric |
| Square Head Bolts | ANSI/ASME B18.2.3.10M | Metric |
| Round Head Bolts | ANSI/ASME B18.5 | Inch Series |
| Round Head Short Square Neck Bolts | ANSI/ASME B18.5.2.1M | Metric |
| Round Head Square Neck Bolts | ANSI/ASME B18.5.2.2M | Metric |
| Round Head Square Neck Bolts With Large Head | ANSI/ASME B18.5.2.3M | Metric |
| Track Bolts | ANSI/ASME B18.10 | Inch Series |
| Forged Eye Bolts | ANSI/ASME B18.15 | Inch Series |
| Lifting Eye Bolts | ANSI/ASME B18.15M | Metric |
| Hex Head Bolts | DIN 931 | Metric |
| Heavy Hex Bolts | DIN 6914 | Metric |
| Countersunk Square Head Bolts With Short Neck | DIN 608 | Metric |
| Lifting Eye Bolts (Type A) | DIN 444A | Metric |
| Lifting Eye Bolts (Type B) | DIN 444B | Metric |
| Square Head Bolts With Collar | DIN 478 | Metric |
| Forged Lifting Eyes/Eye Bolts | DIN 580 | Metric |
| Carriage Bolts | DIN 603 | Metric |
| Flat Countersunk Nib Bolts | DIN 604 | Metric |
| Carriage Bolts | DIN 607 | Metric |
| U Bolts | DIN 3570 | Metric |
| Hex Flange Bolts | DIN 6921 | Metric |
| Plough Bolts with 2 Nibs | DIN 11014 | Metric |
| Hex Head Bolts with Shank | ISO 4014 | Metric |
| Hex Head Bolts with Nuts | ISO 4016 | Metric |
| Full Thread Hex Head Bolts | ISO 4017 | Metric |
| Hex Flange Bolts | ISO 4162 | Metric |
| Hex Flange Bolts | ISO 8100 | Metric |
| Hex Bolt With Flange | ISO 8102 | Metric |
| Hex Flange Bolts | ISO 15071 | Metric |
| Mushroom Head Square Neck Bolts | ISO 8677 | Metric |
| Fine Threaded Hex Head Bolts | ISO 8765 | Metric |
| Hex Head Bolts | IS 1363 Part 1 | Metric |
| Hex Head Bolts | IS 1363 Part 2 | Metric |
| Hex Head Bolts | IS 1364 Part 1 | Metric |
| Hex Head Bolts For Structural Joints | IS 6639 | Metric |
| Hex Head Transmission Tower Bolts | IS 12427 | Metric |
| Hexagon Flange Bolts | IS 15582 | Metric |
Property Class
| For Bolts & Screws | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H |
| For Nuts | A2-70, A2-80, A4-70, A4-80, F594C, F594D, F594G, F594H, A2-035, A4-040 |
| For SHCS | F837B, F837C, F837E, F837 |
| For Threaded Rods | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2 |
Super Duplex Steel UNS S32750 & S32760 Bolts Dimensions
| **All measurements in millimeters** | ||||||||
|---|---|---|---|---|---|---|---|---|
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNEASTM A479 | ACROASTM A479 THE FLATS | ACROASTM A479 CORNERS | ||||
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
ASME SF468 Heavy Hex Bolts Dimensions
| Diameter (D) | Body Diameter (D) | Across the Flats (F) | Across the Corners © | Head Height (H) | Thread Lengths (T) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAX | MIN | MAX | MIN | MAX | MIN | MAX | MIN | < 6” | > 6” | |
| 1/2 | 0.515 | 0.482 | 0.875 | 0.85 | 1.01 | 0.969 | 0.364 | 0.302 | 1.25 | 1.5 |
| 5/8 | 0.642 | 0.605 | 1.062 | 1.031 | 1.227 | 1.175 | 0.444 | 0.378 | 1.5 | 1.75 |
| 3/4 | 0.768 | 0.729 | 1.25 | 1.212 | 1.443 | 1.383 | 0.524 | 0.455 | 1.75 | 2 |
| 7/8 | 0.895 | 0.852 | 1.438 | 1.394 | 1.66 | 1.589 | 0.604 | 0.531 | 2 | 2.25 |
| 1 | 1.022 | 0.976 | 1.625 | 1.575 | 1.876 | 1.796 | 0.7 | 0.591 | 2.25 | 2.5 |
| 1 1/8 | 1.149 | 1.098 | 1.812 | 1.756 | 2.093 | 2.002 | 0.78 | 0.658 | 2.5 | 2.75 |
| 1 1/4 | 1.277 | 1.223 | 2 | 1.938 | 2.309 | 2.209 | 0.876 | 0.749 | 2.75 | 3 |
| 1 3/8 | 1.404 | 1.345 | 2.188 | 2.119 | 2.526 | 2.416 | 0.94 | 0.81 | 3 | 3.25 |
| 1 1/2 | 1.531 | 1.47 | 2.375 | 2.3 | 2.742 | 2.622 | 1.036 | 0.902 | 3.25 | 3.5 |
| 1 3/4 | 1.785 | 1.716 | 2.75 | 2.662 | 3.175 | 3.035 | 1.196 | 1.054 | 3.75 | 4 |
| 2 | 2.039 | 1.964 | 3.125 | 3.025 | 3.608 | 3.449 | 1.388 | 1.175 | 4.25 | 4.5 |
| 2 1/4 | 2.305 | 2.214 | 3.5 | 3.388 | 4.041 | 3.862 | 1.548 | 1.327 | 4.75 | 5 |
| 2 1/2 | 2.559 | 2.461 | 3.875 | 3.75 | 4.474 | 4.275 | 1.708 | 1.479 | 5.25 | 5.5 |
| 2 3/4 | 2.827 | 2.711 | 4.25 | 4.112 | 4.907 | 4.688 | 1.869 | 1.632 | 5.75 | 6 |
| 3 | 3.081 | 2.961 | 4.625 | 4.475 | 5.34 | 5.102 | 2.06 | 1.815 | 6.25 | 6.5 |
Super Duplex Steel UNS S32750 & S32760 Bolts Torque Chart
| Torque Specifications | ||||||
|---|---|---|---|---|---|---|
| Bolt Size Inches or # | Threads Per Inch | Standard Dry Torque in Inch-Pounds | ||||
| Super Duplex Steel 2507 | ||||||
| #2 | 56 | 2.5 | ||||
| 64 | 3.0 | |||||
| #3 | 48 | 3.9 | ||||
| 56 | 4.4 | |||||
| #4 | 40 | 5.2 | ||||
| 48 | 6.6 | |||||
| #5 | 40 | 7.7 | ||||
| 44 | 9.4 | |||||
| #6 | 32 | 9.6 | ||||
| 40 | 12.1 | |||||
| #8 | 32 | 19.8 | ||||
| 36 | 22.0 | |||||
| #10 | 24 | 22.8 | ||||
| 32 | 31.7 | |||||
| 1/4 | 20 | 75.2 | ||||
| 28 | 94.0 | |||||
| 5/16 | 18 | 132 | ||||
| 24 | 142 | |||||
| 3/8 | 16 | 236 | ||||
| 24 | 259 | |||||
| 7/16 | 14 | 376 | ||||
| 20 | 400 | |||||
| 1/2 | 13 | 517 | ||||
| 20 | 541 | |||||
| 9/16 | 12 | 682 | ||||
| 18 | 752 | |||||
| 5/8 | 11 | 1110 | ||||
| 18 | 1244 | |||||
| 3/4 | 10 | 1530 | ||||
| 16 | 1490 | |||||
| 7/8 | 9 | 2328 | ||||
| 14 | 2318 | |||||
| 1 | 8 | 3440 | ||||
| 14 | 3110 | |||||
| 1 1/8 | 7 | 413 | ||||
| 12 | 390 | |||||
| 1 1/4 | 7 | 523 | ||||
| 12 | 480 | |||||
| 1 1/2 | 6 | 888 | ||||
| 12 | 703 | |||||
Super Duplex Steel UNS S32750 & S32760 Bolts Sizes
| Super Duplex Steel UNS S32750 & S32760 Bolts size chart | Super Duplex Steel UNS S32750 & S32760 Bolts size guide | Super Duplex Steel UNS S32750 & S32760 Bolts dimensions |
|---|---|---|
| 3/8″-16 x 1″ Grade 5 Finish Super Duplex Steel UNS S32750 & S32760 Bolts | 1/2″-13 x 1-1/2″ Grade 5 Finish Super Duplex Steel UNS S32750 & S32760 Bolts | 1/4″-20 x 1″ Grade 5 Finish Super Duplex Steel UNS S32750 & S32760 Bolts |
| 3/8″-16 x 1-1/4″ Grade 5 Finish Super Duplex Steel UNS S32750 & S32760 Bolts | 3/8″-16 x 1-1/2″ Grade 5 Finish Super Duplex Steel UNS S32750 & S32760 Bolts | 1/4″-20 x 3/4″ Grade 5 Finish Super Duplex Steel UNS S32750 & S32760 Bolts |
| 1/2″-13 x 2″ Grade 8 Yellow Finish Super Duplex Steel UNS S32750 & S32760 Bolts | 1/2″-13 x 2″ Grade 5 Finish Super Duplex Steel UNS S32750 & S32760 Bolts | 1/2″-13 x 1-1/2″ Grade 8 Yellow Finish Super Duplex Steel UNS S32750 & S32760 Bolts |
| 5/8″-11 x 2″ Grade 8 Yellow Finish Super Duplex Steel UNS S32750 & S32760 Bolts | 1/4″-20 x 3/4″ Grade 18-8 Super Duplex Steel UNS S32750 & S32760 Bolts | 5/16″-18 x 1″ Grade 5 Finish Super Duplex Steel UNS S32750 & S32760 Bolts |
| 3/8″-16 x 1″ Grade 8 Yellow Finish Super Duplex Steel UNS S32750 & S32760 Bolts | 3/8″-16 x 1″ Grade 18-8 Super Duplex Steel UNS S32750 & S32760 Bolts | 3/8″-16 x 1-1/2″ Grade 8 Yellow Finish Super Duplex Steel UNS S32750 & S32760 Bolts |
| 1/4″-20 x 1″ Grade 18-8 Super Duplex Steel UNS S32750 & S32760 Bolts | 5/8″-11 x 2″ Grade 5 Finish Super Duplex Steel UNS S32750 & S32760 Bolts | 5/8″-11 x 2-1/2″ Grade 8 Yellow Finish Super Duplex Steel UNS S32750 & S32760 Bolts |
| 3/8″-16 x 2″ Grade 5 Finish Super Duplex Steel UNS S32750 & S32760 Bolts | 3/8″-16 x 1-1/4″ Grade 8 Yellow Finish Super Duplex Steel UNS S32750 & S32760 Bolts |
Super Duplex Steel 2507 Bolts Weight Chart
| MM THREADS AS PER IS 1363/67 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| APPROXIMATE WEIGHT IN KGS FOR 100 NOS | ||||||||||
| LENGTH | DIAMETER | |||||||||
| M 5 | M 6 | M 8 | M 10 | M 12 | M 14 | M 16 | M 18 | M 20 | M 22 | |
| 16 mm | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
| 20 mm | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
| 25 mm | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
| 30 mm | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
| 35 mm | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
| 40 mm | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
| 45 mm | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
| 50 mm | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
| 55 mm | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
| 60 mm | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
| 65 mm | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
| 70 mm | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
| 75 mm | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
| 80 mm | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
| 90 mm | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
| 100 mm | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
| 110 mm | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
| 120 mm | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
| 130 mm | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
| 140 mm | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
| 150 mm | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
| 160 mm | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
| 170 mm | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
| 180 mm | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
| 190 mm | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
| 200 mm | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
| 220 mm | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
| 240 mm | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
| 250 mm | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
| 260 mm | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
| 280 mm | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
| 300 mm | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
| 320 mm | 31.646 | 56.818 | 92.593 | |||||||
| 340 mm | 33.557 | 60.241 | 98.039 | |||||||
| 360 mm | 35.211 | 63.291 | 104.167 | |||||||
| 380 mm | 37.037 | 66.667 | 108.696 | |||||||
| 400 mm | 39.063 | 69.444 | 113.636 | |||||||
Other Types of Super Duplex Steel UNS S32750 & S32760 Bolts
| Super Duplex Steel UNS S32750 Eye Bolt | SDSS UNS S32750 T Bolt |
| SDSS UNS S32760 Lag Bolt | Super Duplex Steel UNS S32760 Step Bolt |
| SDSS DIN 1.4410 Allen Bolts | Super Duplex 2570 Anchor Bolts |
| Super Duplex SAF 2570 Counter sunk Bolt | SDSS DIN 1.4410 Track Bolts |
| Super Duplex Grade S32750 Mushroom Head Square Neck Bolts | Super Duplex Stainless Steel UNS S32760 T-Head Bolts |
| Super Duplex Stainless Steel UNS S32760 Hexagon Domed Cap Nuts | Super Duplex Grade S32760 Foundation Bolts |
| ASTM A479 SDSS UNS S32750 Strut Bolts | S32750 Super Duplex Steel 6mm Nyloc Bolts |
| S32760 Super Duplex Steel U Bolt | ASTM A479 SDSS UNS S32760 Elevator Bolts |
| ASME SA479 SDSS UNS S32750 12 Point Flange Bolts | High Quality S32750 Super Duplex Steel Stove Bolts |
| High Quality S32760 Super Duplex Steel Hanger Bolts | ASME SA479 SDSS UNS S32760 Hexagon Bolts with Thread |