Duplex Steel UNS S31803 & S32205 Bolts
Duplex Steel UNS S31803 Square Bolts, DSS UNS S32205 Half Threaded Bolts, Duplex 2205 T-Bolts, Duplex Grade S31803 Structural Bolt Suppliers in India.
Ranfit Metal & Alloys is a distinguished exporting and trading firm that offers a range of Duplex UNS S31803 & S32205 Bolts, which is precipitation hardenable through additions of aluminum and titanium. Duplex UNS S31803 Bolts offers the optimum combination of high strength and ductility across the size range. In age-hardened condition, Duplex UNS S32205 Bolts also has greater tendency toward SCC in some environments. Duplex UNS S31803 Hex Head Bolts is widely used in marine environments due to its excellent corrosion resistance. The thermal processing in Duplex UNS S32205 Square Bolts used to effect precipitation is commonly called age hardening or aging. Duplex UNS S31803 U-Bolts is used in pump and valve parts for chemical processing. Duplex UNS S32205 Eye Bolts has exceptionally good dimensional stability.
The alloying additions in Duplex UNS S31803 T-Bolts make it age hardenable under controlled conditions of temperature and time. These amplified properties in Duplex UNS S32205 Hex Bolts are obtained by a thermal processing used to effect precipitation, typically called age hardening or aging. Duplex UNS S31803 Lag Bolts is also obtained by heating under controlled conditions so that sub-microscopic particles are precipitated throughout the matrix. The usage of Duplex UNS S32205 Counter Sunk Bolts is limited to those applications where it cannot be replaced with cheaper alternatives. Duplex 2205 Bolts is also used in oil-well tools and instruments, along with in doctor blades and scrapers.
Duplex Steel UNS S31803 Hex Head Bolts, DSS DIN 1.4462 Countersunk Bolts, SAF 2205 T-Head Bolts, Duplex Stainless Steel UNS S32205 Eye Bolts Supplier & Exporter in India.
Duplex Steel UNS S31803 & S32205 Bolts Specification
| Grade | Duplex Steel 2205 (UNS S31803/S32205) |
|---|---|
| Duplex Steel UNS S31803 & S32205 Bolt size | M 02 to M 160, Custom Sizes |
| Duplex Steel UNS S31803 & S32205 Bolts Length | 3 mm to 200 mm |
| Duplex Steel UNS S31803 & S32205 Bolt | UNF, BSW, BSF, METRIC, UNC, or as required |
| Standard of Duplex Steel UNS S31803 & S32205 Bolts | IS1364, ISO 4014, ISO 4017, DIN 933, DIN 931, BS 1083, BS 1768, ASME B18.2.1, JIS B1180, DIN 558, ISO 4018, DIN-EN14399-4, DIN 601, ISO 4016, CSN 21301, EU 24016, DIN 7968, DIN7990, ASME B18.2.1, B18.5 |
| Form of Duplex Steel UNS S31803 & S32205 Bolts | Hex, Threading, Square, Round as per Gauge Etc. |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin, etc. |
| Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Popular Types of Bolts | Hex Bolts, Flange Bolts, Hex Head Bolts, Lag Bolts, Square Bolts, Eye Bolts, U Bolts, T Bolts, Counter sunk Bolts etc. |
| Duplex Steel UNS S31803 & S32205 Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate of Bolts | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive of Bolts | Six-Lobe,Phillips,Phillips/Slot, Slotted etc |
| Packing of Bolts | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating | Ptfe Coated Bolts Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Duplex Steel UNS S31803 & S32205 Bolts finishing | Coatings & Finishes : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Duplex Steel UNS S31803 & S32205 Bolts Equivalent Grades
| Duplex | Common Name | Related Specifications | ||
|---|---|---|---|---|
| European DIN | UNS | ASTM/ASME | ||
| Duplex Steel | SAF 2205® | 1.4462 | S31803/S32205 | F51/F60 |
Chemical Composition of Duplex Steel UNS S31803 & S32205 Bolts
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | Fe |
| S31803 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 22.0 – 23.0 | 3.0 – 3.5 | 4.50 – 6.50 | 0.14 – 0.20 | 63.72 min |
| S32205 | 0.030 max | 2.00 max | 1.00 max | 0.030 max | 0.020 max | 21.0 – 23.0 | 2.50 – 3.50 | 4.50 – 6.50 | 0.8 – 0.20 | 63.54 min |
Mechanical Properties of Duplex Steel UNS S31803 & S32205 Bolts
| Element | Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| S31803 / S32205 | 7.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80000 , MPa – 550 | Psi – 116000 , MPa – 800 | 15 % |
Types of Duplex Steel UNS S31803 & S32205 Bolts
Duplex Steel UNS S31803 & S32205 Hollow Allen Bolts
Duplex Steel UNS S31803 & S32205 Anchor Bolts
Duplex Steel UNS S31803 & S32205 Hex Bolts
Duplex Steel UNS S31803 & S32205 Allen Cap Bolts
Duplex Steel UNS S31803 & S32205 Flanged Bolts
Duplex Steel UNS S31803 & S32205 Lag Bolts
Duplex Steel UNS S31803 & S32205 Counter Sunk Bolts
Duplex Steel UNS S31803 & S32205 J Bolts
Duplex Steel UNS S31803 & S32205 U Bolts
Duplex Steel UNS S31803 & S32205 Square Bolts
Duplex Steel UNS S31803 & S32205 Carriage Bolts
Duplex Steel UNS S31803 & S32205 Long Eye Bolts
Duplex Steel UNS S31803 & S32205 Bolts Forms & Availability
| Products | Size | |
|---|---|---|
| Duplex Steel UNS S31803 & S32205 Heavy Hex Bolts | Duplex Steel UNS S31803 & S32205 Hollow Hex Bolts | M 02 to M 160, Custom Sizes |
| Duplex Steel UNS S31803 & S32205 Hollow Allen Bolts | Duplex Steel UNS S31803 & S32205 Machine Bolts | |
| Duplex Steel UNS S31803 & S32205 Socket Head Bolts | Duplex Steel UNS S31803 & S32205 Hex Flange Bolts | |
| Duplex Steel UNS S31803 & S32205 Eye Bolts | Duplex Steel UNS S31803 & S32205 Lag Bolts | |
| Duplex Steel UNS S31803 & S32205 J Bolts | Duplex Steel UNS S31803 & S32205 U Bolts | |
| Duplex Steel UNS S31803 & S32205 Shoulder Bolts | Duplex Steel UNS S31803 & S32205 Elevator Bolts | |
| Duplex Steel UNS S31803 & S32205 Hanger Bolts | Duplex Steel UNS S31803 & S32205 Allen Bolts | |
ASTM F468 Fasteners Standard
| Hexagon Bolt / Set Screws | Stud Bolt | Hexagon Nuts | Socket Cap screws |
|---|---|---|---|
| DIN 931 | BS4882 | DIN 934 | DIN 912 |
| DIN 933 | DIN 976 | BS 1768 | DIN 6912 |
| BS 1768 | BS 1769 | DIN 7984 | |
| UNI 5731 | BS 1083 | ANSI B18.3 | |
| UNI 5739 | BS 3692 | ISO 4762 | |
| ISO 4014 | ISO 4032 | UNI 5931 | |
| ISO 4017 | ISO 4033 | BS 2470 | |
| BS 1769 | ANSI B18.2.2 | BS 4168 | |
| BS 3692 | |||
| ANSI B18.2.1 | |||
| Socket & Slotted Set Screws | Socket & Slotted Countersunk Screws | Studs | Washers |
| DIN 913 | DIN 963 | DIN 938 | DIN 125 |
| DIN 914 | DIN 7991 | DIN 939 | DIN 9021 |
| DIN 915 | BS 4168 | DIN 2510 | BS 4320 |
| DIN 916 | BS 1981 | BS 4439 | BS 3410 |
| DIN 551 | BS 483 | BS 2693 | |
| DIN 553 | BS 2470 | Spring Washers | |
| DIN 438 | DIN 127 | ||
| BS 4168 | BS 4464 | ||
| BS 1802 |
ANSI And/Or ASME Standards Bolts (Inch Series)
| Description | Standard | Measurement System |
|---|---|---|
| Square & Hex Head Bolts | ANSI/ASME B18.2.1 | Inch Series |
| Hex Head Bolts | ANSI/ASME B18.2.3.5M | Metric |
| Heavy Hex Bolts | ANSI/ASME B18.2.3.6M | Metric |
| Heavy Hex Structural Bolts | ANSI/ASME B18.2.3.7M | Metric |
| Square Head Bolts | ANSI/ASME B18.2.3.10M | Metric |
| Round Head Bolts | ANSI/ASME B18.5 | Inch Series |
| Round Head Short Square Neck Bolts | ANSI/ASME B18.5.2.1M | Metric |
| Round Head Square Neck Bolts | ANSI/ASME B18.5.2.2M | Metric |
| Round Head Square Neck Bolts With Large Head | ANSI/ASME B18.5.2.3M | Metric |
| Track Bolts | ANSI/ASME B18.10 | Inch Series |
| Forged Eye Bolts | ANSI/ASME B18.15 | Inch Series |
| Lifting Eye Bolts | ANSI/ASME B18.15M | Metric |
| Hex Head Bolts | DIN 931 | Metric |
| Heavy Hex Bolts | DIN 6914 | Metric |
| Countersunk Square Head Bolts With Short Neck | DIN 608 | Metric |
| Lifting Eye Bolts (Type A) | DIN 444A | Metric |
| Lifting Eye Bolts (Type B) | DIN 444B | Metric |
| Square Head Bolts With Collar | DIN 478 | Metric |
| Forged Lifting Eyes/Eye Bolts | DIN 580 | Metric |
| Carriage Bolts | DIN 603 | Metric |
| Flat Countersunk Nib Bolts | DIN 604 | Metric |
| Carriage Bolts | DIN 607 | Metric |
| U Bolts | DIN 3570 | Metric |
| Hex Flange Bolts | DIN 6921 | Metric |
| Plough Bolts with 2 Nibs | DIN 11014 | Metric |
| Hex Head Bolts with Shank | ISO 4014 | Metric |
| Hex Head Bolts with Nuts | ISO 4016 | Metric |
| Full Thread Hex Head Bolts | ISO 4017 | Metric |
| Hex Flange Bolts | ISO 4162 | Metric |
| Hex Flange Bolts | ISO 8100 | Metric |
| Hex Bolt With Flange | ISO 8102 | Metric |
| Hex Flange Bolts | ISO 15071 | Metric |
| Mushroom Head Square Neck Bolts | ISO 8677 | Metric |
| Fine Threaded Hex Head Bolts | ISO 8765 | Metric |
| Hex Head Bolts | IS 1363 Part 1 | Metric |
| Hex Head Bolts | IS 1363 Part 2 | Metric |
| Hex Head Bolts | IS 1364 Part 1 | Metric |
| Hex Head Bolts For Structural Joints | IS 6639 | Metric |
| Hex Head Transmission Tower Bolts | IS 12427 | Metric |
| Hexagon Flange Bolts | IS 15582 | Metric |
Property Class
| For Bolts & Screws | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H |
| For Nuts | A2-70, A2-80, A4-70, A4-80, F594C, F594D, F594G, F594H, A2-035, A4-040 |
| For SHCS | F837B, F837C, F837E, F837 |
| For Threaded Rods | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2 |
Duplex Steel UNS S31803 & S32205 Bolts Dimensions
| **All measurements in millimeters** | ||||||||
|---|---|---|---|---|---|---|---|---|
| NOMINAL SIZE (D) | BODY DIAMETER | HEAD THICKNEASTM A479 | ACROASTM A479 THE FLATS | ACROASTM A479 CORNERS | ||||
| D (MAX) | D (MIN) | H (MAX) | H (MIN) | F (MAX) | F (MIN) | C (MAX) | C (MIN) | |
| m10 | 10.00 | 9.78 | 6.63 | 6.17 | 17.00 | 15.73 | 18.48 | 17.77 |
| m12 | 12.00 | 11.73 | 7.76 | 4.24 | 19.00 | 17.73 | 20.78 | 20.03 |
| m14 | 14.00 | 13.73 | 9.09 | 8.51 | 22.00 | 20.67 | 24.25 | 23.35 |
| m16 | 16.00 | 15.73 | 10.32 | 9.68 | 24.00 | 23.67 | 27.71 | 26.75 |
| m20 | 20.00 | 19.67 | 12.88 | 12.12 | 30.00 | 29.16 | 34.64 | 32.95 |
| m24 | 24.00 | 23.67 | 15.44 | 14.56 | 36.00 | 35.00 | 41.57 | 39.55 |
| m30 | 30.00 | 29.67 | 19.48 | 17.92 | 46.00 | 45.00 | 53.12 | 50.85 |
| m36 | 36.00 | 35.61 | 23.38 | 21.63 | 55.00 | 53.80 | 63.51 | 60.79 |
| m42 | 42.00 | 41.38 | 26.97 | 25.03 | 65.00 | 62.90 | 75.06 | 71.71 |
| m48 | 48.00 | 47.38 | 31.07 | 28.93 | 75.00 | 72.60 | 86.60 | 82.76 |
| m56 | 56.00 | 55.26 | 36.2 | 33.80 | 85.00 | 82.20 | 98.15 | 93.71 |
| m64 | 64.00 | 63.26 | 41.32 | 38.68 | 95.00 | 91.80 | 109.70 | 104.65 |
| m72 | 72.00 | 71.26 | 46.45 | 43.55 | 105.00 | 101.40 | 121.24 | 115.60 |
| m80 | 80.00 | 79.26 | 51.58 | 48.42 | 115.00 | 111.00 | 132.72 | 126.54 |
| m90 | 90.00 | 89.13 | 57.74 | 54.26 | 130.00 | 125.50 | 150.11 | 143.07 |
| m100 | 90.00 | 99.13 | 63.9 | 60.10 | 145.00 | 140.00 | 167.43 | 159.60 |
ASME SF468 Heavy Hex Bolts Dimensions
| Diameter (D) | Body Diameter (D) | Across the Flats (F) | Across the Corners © | Head Height (H) | Thread Lengths (T) | |||||
|---|---|---|---|---|---|---|---|---|---|---|
| MAX | MIN | MAX | MIN | MAX | MIN | MAX | MIN | < 6” | > 6” | |
| 1/2 | 0.515 | 0.482 | 0.875 | 0.85 | 1.01 | 0.969 | 0.364 | 0.302 | 1.25 | 1.5 |
| 5/8 | 0.642 | 0.605 | 1.062 | 1.031 | 1.227 | 1.175 | 0.444 | 0.378 | 1.5 | 1.75 |
| 3/4 | 0.768 | 0.729 | 1.25 | 1.212 | 1.443 | 1.383 | 0.524 | 0.455 | 1.75 | 2 |
| 7/8 | 0.895 | 0.852 | 1.438 | 1.394 | 1.66 | 1.589 | 0.604 | 0.531 | 2 | 2.25 |
| 1 | 1.022 | 0.976 | 1.625 | 1.575 | 1.876 | 1.796 | 0.7 | 0.591 | 2.25 | 2.5 |
| 1 1/8 | 1.149 | 1.098 | 1.812 | 1.756 | 2.093 | 2.002 | 0.78 | 0.658 | 2.5 | 2.75 |
| 1 1/4 | 1.277 | 1.223 | 2 | 1.938 | 2.309 | 2.209 | 0.876 | 0.749 | 2.75 | 3 |
| 1 3/8 | 1.404 | 1.345 | 2.188 | 2.119 | 2.526 | 2.416 | 0.94 | 0.81 | 3 | 3.25 |
| 1 1/2 | 1.531 | 1.47 | 2.375 | 2.3 | 2.742 | 2.622 | 1.036 | 0.902 | 3.25 | 3.5 |
| 1 3/4 | 1.785 | 1.716 | 2.75 | 2.662 | 3.175 | 3.035 | 1.196 | 1.054 | 3.75 | 4 |
| 2 | 2.039 | 1.964 | 3.125 | 3.025 | 3.608 | 3.449 | 1.388 | 1.175 | 4.25 | 4.5 |
| 2 1/4 | 2.305 | 2.214 | 3.5 | 3.388 | 4.041 | 3.862 | 1.548 | 1.327 | 4.75 | 5 |
| 2 1/2 | 2.559 | 2.461 | 3.875 | 3.75 | 4.474 | 4.275 | 1.708 | 1.479 | 5.25 | 5.5 |
| 2 3/4 | 2.827 | 2.711 | 4.25 | 4.112 | 4.907 | 4.688 | 1.869 | 1.632 | 5.75 | 6 |
| 3 | 3.081 | 2.961 | 4.625 | 4.475 | 5.34 | 5.102 | 2.06 | 1.815 | 6.25 | 6.5 |
Duplex Steel UNS S31803 & S32205 Bolts Torque Chart
| Torque Specifications | ||||||
|---|---|---|---|---|---|---|
| Bolt Size Inches or # | Threads Per Inch | Standard Dry Torque in Inch-Pounds | ||||
| Duplex Steel 2205 | ||||||
| #2 | 56 | 2.5 | ||||
| 64 | 3.0 | |||||
| #3 | 48 | 3.9 | ||||
| 56 | 4.4 | |||||
| #4 | 40 | 5.2 | ||||
| 48 | 6.6 | |||||
| #5 | 40 | 7.7 | ||||
| 44 | 9.4 | |||||
| #6 | 32 | 9.6 | ||||
| 40 | 12.1 | |||||
| #8 | 32 | 19.8 | ||||
| 36 | 22.0 | |||||
| #10 | 24 | 22.8 | ||||
| 32 | 31.7 | |||||
| 1/4 | 20 | 75.2 | ||||
| 28 | 94.0 | |||||
| 5/16 | 18 | 132 | ||||
| 24 | 142 | |||||
| 3/8 | 16 | 236 | ||||
| 24 | 259 | |||||
| 7/16 | 14 | 376 | ||||
| 20 | 400 | |||||
| 1/2 | 13 | 517 | ||||
| 20 | 541 | |||||
| 9/16 | 12 | 682 | ||||
| 18 | 752 | |||||
| 5/8 | 11 | 1110 | ||||
| 18 | 1244 | |||||
| 3/4 | 10 | 1530 | ||||
| 16 | 1490 | |||||
| 7/8 | 9 | 2328 | ||||
| 14 | 2318 | |||||
| 1 | 8 | 3440 | ||||
| 14 | 3110 | |||||
| 1 1/8 | 7 | 413 | ||||
| 12 | 390 | |||||
| 1 1/4 | 7 | 523 | ||||
| 12 | 480 | |||||
| 1 1/2 | 6 | 888 | ||||
| 12 | 703 | |||||
Duplex Steel UNS S31803 & S32205 Bolts Sizes
| Duplex Steel UNS S31803 & S32205 Bolts size chart | Duplex Steel UNS S31803 & S32205 Bolts size guide | Duplex Steel UNS S31803 & S32205 Bolts dimensions |
|---|---|---|
| 3/8″-16 x 1″ Grade 5 Finish Duplex Steel UNS S31803 & S32205 Bolts | 1/2″-13 x 1-1/2″ Grade 5 Finish Duplex Steel UNS S31803 & S32205 Bolts | 1/4″-20 x 1″ Grade 5 Finish Duplex Steel UNS S31803 & S32205 Bolts |
| 3/8″-16 x 1-1/4″ Grade 5 Finish Duplex Steel UNS S31803 & S32205 Bolts | 3/8″-16 x 1-1/2″ Grade 5 Finish Duplex Steel UNS S31803 & S32205 Bolts | 1/4″-20 x 3/4″ Grade 5 Finish Duplex Steel UNS S31803 & S32205 Bolts |
| 1/2″-13 x 2″ Grade 8 Yellow Finish Duplex Steel UNS S31803 & S32205 Bolts | 1/2″-13 x 2″ Grade 5 Finish Duplex Steel UNS S31803 & S32205 Bolts | 1/2″-13 x 1-1/2″ Grade 8 Yellow Finish Duplex Steel UNS S31803 & S32205 Bolts |
| 5/8″-11 x 2″ Grade 8 Yellow Finish Duplex Steel UNS S31803 & S32205 Bolts | 1/4″-20 x 3/4″ Grade 18-8 Duplex Steel UNS S31803 & S32205 Bolts | 5/16″-18 x 1″ Grade 5 Finish Duplex Steel UNS S31803 & S32205 Bolts |
| 3/8″-16 x 1″ Grade 8 Yellow Finish Duplex Steel UNS S31803 & S32205 Bolts | 3/8″-16 x 1″ Grade 18-8 Duplex Steel UNS S31803 & S32205 Bolts | 3/8″-16 x 1-1/2″ Grade 8 Yellow Finish Duplex Steel UNS S31803 & S32205 Bolts |
| 1/4″-20 x 1″ Grade 18-8 Duplex Steel UNS S31803 & S32205 Bolts | 5/8″-11 x 2″ Grade 5 Finish Duplex Steel UNS S31803 & S32205 Bolts | 5/8″-11 x 2-1/2″ Grade 8 Yellow Finish Duplex Steel UNS S31803 & S32205 Bolts |
| 3/8″-16 x 2″ Grade 5 Finish Duplex Steel UNS S31803 & S32205 Bolts | 3/8″-16 x 1-1/4″ Grade 8 Yellow Finish Duplex Steel UNS S31803 & S32205 Bolts |
Duplex Steel 2205 Bolts Weight Chart
| MM THREADS AS PER IS 1363/67 | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| APPROXIMATE WEIGHT IN KGS FOR 100 NOS | ||||||||||
| LENGTH | DIAMETER | |||||||||
| M 5 | M 6 | M 8 | M 10 | M 12 | M 14 | M 16 | M 18 | M 20 | M 22 | |
| 16 mm | 0.448 | 0.743 | 1.590 | 3.211 | ||||||
| 20 mm | 0.598 | 0.812 | 1.711 | 3.411 | 4.892 | |||||
| 25 mm | 0.660 | 0.897 | 1.871 | 3.660 | 5.252 | 8.170 | ||||
| 30 mm | 0.737 | 1.010 | 2.070 | 3.912 | 5.574 | 9.690 | 10.707 | 18.657 | ||
| 35 mm | 0.804 | 1.120 | 2.271 | 4.223 | 5.974 | 10.000 | 11.416 | 16.026 | 19.608 | |
| 40 mm | 0.881 | 1.230 | 2.470 | 4.533 | 6.410 | 10.288 | 12.107 | 16.667 | 20.747 | |
| 45 mm | 0.958 | 1.340 | 2.671 | 4.840 | 6.859 | 10.504 | 12.821 | 17.241 | 21.739 | |
| 50 mm | 1.030 | 1.450 | 2.870 | 5.155 | 7.299 | 11.261 | 13.624 | 17.857 | 22.727 | 28.409 |
| 55 mm | 1.560 | 3.071 | 5.464 | 7.740 | 11.628 | 14.409 | 18.868 | 23.810 | 30.120 | |
| 60 mm | 1.670 | 3.270 | 5.774 | 8.183 | 12.255 | 15.244 | 20.000 | 25.126 | 32.051 | |
| 65 mm | 1.781 | 3.472 | 6.083 | 8.621 | 12.626 | 16.026 | 21.008 | 26.455 | 34.014 | |
| 70 mm | 1.890 | 3.671 | 6.394 | 9.058 | 12.987 | 16.835 | 22.124 | 27.778 | 35.461 | |
| 75 mm | 2.000 | 3.873 | 6.702 | 9.506 | 13.228 | 17.606 | 23.256 | 29.070 | 39.063 | |
| 80 mm | 2.111 | 4.072 | 7.013 | 10.000 | 13.889 | 18.248 | 24.510 | 30.303 | 40.000 | |
| 90 mm | 4.472 | 7.634 | 10.917 | 14.925 | 19.841 | 26.042 | 33.113 | 41.667 | ||
| 100 mm | 4.873 | 8.251 | 11.820 | 16.340 | 21.459 | 27.778 | 35.714 | 46.296 | ||
| 110 mm | 8.881 | 12.723 | 17.730 | 23.041 | 31.250 | 38.168 | 47.170 | |||
| 120 mm | 9.506 | 13.624 | 18.797 | 24.631 | 32.895 | 40.984 | 50.000 | |||
| 130 mm | 10.101 | 14.535 | 20.000 | 26.316 | 34.722 | 43.478 | 52.632 | |||
| 140 mm | 10.707 | 15.432 | 20.833 | 27.933 | 35.461 | 46.296 | 55.556 | |||
| 150 mm | 11.312 | 16.340 | 22.222 | 29.412 | 37.594 | 48.544 | 58.824 | |||
| 160 mm | 11.905 | 17.241 | 24.272 | 31.056 | 40.984 | 50.505 | 61.728 | |||
| 170 mm | 12.500 | 18.116 | 32.680 | 53.191 | 64.935 | |||||
| 180 mm | 13.123 | 19.011 | 26.882 | 34.247 | 55.556 | 67.568 | ||||
| 190 mm | 13.736 | 19.920 | 35.971 | 58.140 | 70.423 | |||||
| 200 mm | 14.327 | 20.833 | 29.586 | 37.594 | 49.020 | 60.976 | 73.529 | |||
| 220 mm | 15.528 | 22.624 | 40.650 | 65.789 | 79.365 | |||||
| 240 mm | 16.722 | 24.510 | 43.860 | 71.429 | 84.746 | |||||
| 250 mm | 17.301 | 25.381 | 45.455 | 74.627 | 87.719 | |||||
| 260 mm | 17.921 | 26.316 | 47.170 | 76.923 | 90.909 | |||||
| 280 mm | 19.157 | 28.090 | 50.505 | 81.967 | 98.039 | |||||
| 300 mm | 20.325 | 29.940 | 53.763 | 87.719 | 104.167 | |||||
| 320 mm | 31.646 | 56.818 | 92.593 | |||||||
| 340 mm | 33.557 | 60.241 | 98.039 | |||||||
| 360 mm | 35.211 | 63.291 | 104.167 | |||||||
| 380 mm | 37.037 | 66.667 | 108.696 | |||||||
| 400 mm | 39.063 | 69.444 | 113.636 | |||||||
Other Types of Duplex Steel UNS S31803 & S32205 Bolts
| DSS UNS S31803 Eye Bolt | S32205 Duplex Steel T Bolt |
| S32205 Duplex Steel Lag Bolt | DSS UNS S31803 Step Bolt |
| Duplex Stainless Steel UNS S31803 Allen Bolts | Duplex 2205 Anchor Bolts |
| SAF 2205 Counter sunk Bolt | Duplex Stainless Steel UNS S31803 Track Bolts |
| DSS DIN 1.4462 Mushroom Head Square Neck Bolts | Duplex Grade S32205 T-Head Bolts |
| Duplex Grade S32205 Hexagon Domed Cap Nuts | DSS DIN 1.4462 Foundation Bolts |
| ASTM A193 Duplex Steel UNS S31803 Strut Bolts | Duplex Stainless Steel UNS S32205 6mm Nyloc Bolts |
| Duplex Stainless Steel UNS S32205 U Bolt | ASTM A193 Duplex Steel UNS S31803 Elevator Bolts |
| ASME SA193 DSS UNS S31803 12 Point Flange Bolts | DSS UNS S32205 Stove Bolts |
| DSS UNS S32205 Hanger Bolts | ASME SA193 DSS UNS S31803 Hexagon Bolts with Thread |