• Duplex/Super Duplex/Nickel Alloy Bolts/A435 Gr660 Bolts/Xylan Coated Bolts/B16 Bolts/A2-70/A4-80/B8M
background

Incoloy X750 Fasteners Manufacturer & Exporter

Incoloy X750 Fasteners

Incoloy X750 Fasteners, Alloy X750 Foundation Bolts, Incoloy UNS N07750 Threaded Stud, Incoloy Alloy X750 Structural Bolts Supplier & Exporter in India.

Ranfit Metal & Alloys is a renowned exporting and manufacturing firm of Incoloy Alloy X750 Fasteners, which is used in Ethylene furnace quench boilers and Hydrocarbon cracking. Incoloy X750 Nuts is an alloy that exhibits excellent mechanical strength and creep resistance at high temperatures. Incoloy X750 Bolts are used to join two or more components together in a non-permanent joint. In the production of paper pulp, digester liquid heaters are often made of Incoloy X750 Stud Bolts. The chemical balance allows the Incoloy X750 Washers to exhibit excellent resistance to oxidation, carburization, and nitriding atmospheres. Incoloy X750 Screws had been known for some time that higher carbon alloy had higher creep and rupture properties than low-carbon material. The nickel content in Incoloy X750 Round Bars is sufficient for protection against chloride-ion stress-corrosion cracking. The composition of Incoloy X750 Bars offers a high level of strength and corrosion resistance. Incoloy X750 Rods has outstanding resistance to pitting, general corrosion, crevice corrosion, and SCC.

Incoloy X750 Fasteners is used for down-hole and surface gas-well components as well as finding uses in marine and pump shafts or high-strength piping systems. Molybdenum and copper contents in Incoloy UNS N0775 Fasteners enhance resistance to corrosive media. The combination of Nickel and Chromium in Incoloy WNR 2.4669 Fasteners renders protection in both oxidizing and reducing atmospheres. The Titanium and Aluminum in Nickel-Alloy X750 Fasteners are specifically added to give a strengthening of the alloy during ageing.

Alloy X750 Nut, Incoloy Alloy X750 Hex Head Nut, Nickel Alloy X750 Hex Cap Screws, Incoloy DIN 2.4669 Threaded Stud Manufacturer in India.

Incoloy X750 Fasteners Specification

Grade Incoloy X750 (UNS N07750)
Incoloy X750 Fasteners Specifications ASTM B166 / ASME SB 166
Inconel Alloy X750 Fasteners size Bolt / Screw Size : M3 - M56 | 3/6" to 2" | Custom Sizes
Nuts Size : M3 - M56 | 3/6" to 2" | Custom Sizes
Washers Size : M3 - M56 | 3/6" to 2" | Custom Sizes
Machine Screws Size : M1.6 - M12
Self Tapping Screw Size : No.2 - No. 14
Inconel Alloy X750 Fasteners Length 3 mm to 200 mm
Inconel Alloy X750 Studs, Bolts, Threads UNF, BSW, BSF, METRIC, UNC, or as required
Standard of Incoloy X750 Fasteners DIN : DIN 934, DIN 931, DIN 970, DIN 933
UTS : UNEF, NPT, UNC, UNS, UNF, NPTF
ISO : JIS standards, ISO 4033, ISO 4032,
ANSI – American National Standards Institute
ASME B18.5
ANSI B 28.2.4 1M
as per defined in ASME B16.5 standard Inconel® Alloy X750 Stud Bolt length
ANSI B 18.2.4 2M
as per defined in ASME B18.2.2 Inconel Alloy X750 Hex nuts
Form of Incoloy X750 Alloy Fasteners Hex, Threading, Square, Round as per Gauge Etc.
Raw materials Source JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin,etc.
Threads Configuration ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads
Certification Dual Certified As per ASTM & ASME Codes
Dimensions DIN 931, 933, 934, 7991, 976, 125, ASME B18.2.1, B18.3
Threads Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically
Test Certificate of Inconel Alloy Bolting as per EN 10204 / 3.1 Manufacturer Test Certificate
Additional Certifications PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified
Production process M24-M100: hot forging , M2-M24: Cold Froging, for custom-made connecting element machining and CNC
Head drive of Inconel Alloy X750 Bolts Six-Lobe,Phillips,Phillips/Slot, Slotted etc
Packing of Inconel Alloy X750 Fasteners IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request
Surface Coating Ptfe Coated Incoloy X750 Fasteners
Phosphate Coating
Teflon Coating
Zinc Coating
Hot Dipped Galvanizing Coating
Cadmium Coating
Xylon Coating
Incoloy X750 Fasteners finishing Incoloy X750 : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Inconel Alloy, Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel
Zinc (blue, black, yellow, white), black oxide,

Incoloy X750 Fasteners Equivalent Grades

STANDARD UNS WNR.
Incoloy X750 N07750 2.4669

Chemical Composition of Incoloy X750 Fasteners

Element Al C Cr Co Cu Fe Mn Nb Ni Ti S Si
Incoloy X-750 0.40-1.0 .08 max 14.0-17.0 1.00 max 0.50 max 5.0-9.0 1.00 max 0.70-1.20 70.0 min 2.25-2.75 .01 max .50 max

Mechanical Properties of Inconel X750 Fasteners

Element Ultimate Tensile Strength .2% Yield Strength Elongation %
Incoloy X750 1250 MPa, 181000 psi 850 MPa, 123000 psi 30

Types of Incoloy X750 Fasteners

Incoloy X750 Nuts

Incoloy X750 Bolts

Incoloy X750 Washers

Incoloy X750 Stud Bolts

Incoloy X750 Screws

Incoloy X750 Dowel Pins

Incoloy X750 Threaded Hanger Bolt

Incoloy X750 Hexagon Cap Screw

Incoloy X750 Star Washers

Incoloy X750 Socket Set Screw

Incoloy X750 Eye Bolts

Incoloy X750 Square U-Bolts

Incoloy X750 Stud Anchor

Incoloy X750 Threaded Inserts

Incoloy X750 J Bolts

Incoloy X750 Square Nuts

Incoloy X750 Countersunk Washers

Incoloy X750 Barrel Nuts

ASTM B166 / Incoloy X750 Fasteners Forms & Availability

Products Size
ASTM B166 / B446 Inconel Alloy X750 Stud Bolt ASTM B166 / B446 Inconel® Alloy X750 Bolts Sizes M3 - M56 | 3/6" to 2"
ASTM B166 / B446 Inconel Alloy X750 Punched Washer ASTM B166 / B446 Inconel Alloy X750 Pan Head Screw
ASTM B166 / B446 Incoloy X750 Square Nut ASTM B166 / B446 Inconel Alloy X750 Insert Nuts
ASTM B166 / B446 Inconel Alloy X750 Welding Studs ASTM B166 / B446 Inconel Alloy X750 Pan Head Screw
ASTM B166 / B446 Incoloy X750 Cap Screw ASTM B166 / B446 Incoloy X750 Foundation Bolts
ASTM B166 / B446 Inconel Alloy X750 Threaded Rod ASTM B166 / B446 Incoloy X750 Hex Head Bolts
ASTM B166 / B446 Incoloy X750 Nuts ASTM B166 / B446 Incoloy X750 Washers
ASTM B166 / B446 Inconel Alloy X750 Fender Washer ASTM B166 / B446 Inconel® Alloy X750 Lock Nut
ASTM B166 / B446 Inconel Alloy X750 Countersunk Slotted Screw ASTM B166 / B446 Inconel Alloy X750 Double Ended Stud

Incoloy X750 Hex Bolt Dimensions

Nominal Size (D) Body Diameter Head Thickness ASTM B166 Acro ASTM B166 The Flats Acro ASTM B166 Corners
D (MAX) D (MIN) H (MAX) H (MIN) F (MAX) F (MIN) C (MAX) C (MIN)
m10 10.00 9.78 6.63 6.17 17.00 15.73 18.48 17.77
m12 12.00 11.73 7.76 4.24 19.00 17.73 20.78 20.03
m14 14.00 13.73 9.09 8.51 22.00 20.67 24.25 23.35
m16 16.00 15.73 10.32 9.68 24.00 23.67 27.71 26.75
m20 20.00 19.67 12.88 12.12 30.00 29.16 34.64 32.95
m24 24.00 23.67 15.44 14.56 36.00 35.00 41.57 39.55
m30 30.00 29.67 19.48 17.92 46.00 45.00 53.12 50.85
m36 36.00 35.61 23.38 21.63 55.00 53.80 63.51 60.79
m42 42.00 41.38 26.97 25.03 65.00 62.90 75.06 71.71
m48 48.00 47.38 31.07 28.93 75.00 72.60 86.60 82.76
m56 56.00 55.26 36.2 33.80 85.00 82.20 98.15 93.71
m64 64.00 63.26 41.32 38.68 95.00 91.80 109.70 104.65
m72 72.00 71.26 46.45 43.55 105.00 101.40 121.24 115.60
m80 80.00 79.26 51.58 48.42 115.00 111.00 132.72 126.54
m90 90.00 89.13 57.74 54.26 130.00 125.50 150.11 143.07
m100 90.00 99.13 63.9 60.10 145.00 140.00 167.43 159.60

Incoloy X750 Bolts Weight Chart

MM THREADS AS PER IS 1363/67
APPROXIMATE WEIGHT IN KGS FOR 100 NOS
LENGTH DIAMETER
M 5 M 6 M 8 M 10 M 12 M 14 M 16 M 18 M 20 M 22
16 mm 0.448 0.743 1.590 3.211            
20 mm 0.598 0.812 1.711 3.411 4.892          
25 mm 0.660 0.897 1.871 3.660 5.252 8.170        
30 mm 0.737 1.010 2.070 3.912 5.574 9.690 10.707   18.657  
35 mm 0.804 1.120 2.271 4.223 5.974 10.000 11.416 16.026 19.608  
40 mm 0.881 1.230 2.470 4.533 6.410 10.288 12.107 16.667 20.747  
45 mm 0.958 1.340 2.671 4.840 6.859 10.504 12.821 17.241 21.739  
50 mm 1.030 1.450 2.870 5.155 7.299 11.261 13.624 17.857 22.727 28.409
55 mm   1.560 3.071 5.464 7.740 11.628 14.409 18.868 23.810 30.120
60 mm   1.670 3.270 5.774 8.183 12.255 15.244 20.000 25.126 32.051
65 mm   1.781 3.472 6.083 8.621 12.626 16.026 21.008 26.455 34.014
70 mm   1.890 3.671 6.394 9.058 12.987 16.835 22.124 27.778 35.461
75 mm   2.000 3.873 6.702 9.506 13.228 17.606 23.256 29.070 39.063
80 mm   2.111 4.072 7.013 10.000 13.889 18.248 24.510 30.303 40.000
90 mm     4.472 7.634 10.917 14.925 19.841 26.042 33.113 41.667
100 mm     4.873 8.251 11.820 16.340 21.459 27.778 35.714 46.296
110 mm       8.881 12.723 17.730 23.041 31.250 38.168 47.170
120 mm       9.506 13.624 18.797 24.631 32.895 40.984 50.000
130 mm       10.101 14.535 20.000 26.316 34.722 43.478 52.632
140 mm       10.707 15.432 20.833 27.933 35.461 46.296 55.556
150 mm       11.312 16.340 22.222 29.412 37.594 48.544 58.824
160 mm       11.905 17.241 24.272 31.056 40.984 50.505 61.728
170 mm       12.500 18.116   32.680   53.191 64.935
180 mm       13.123 19.011 26.882 34.247   55.556 67.568
190 mm       13.736 19.920   35.971   58.140 70.423
200 mm       14.327 20.833 29.586 37.594 49.020 60.976 73.529
220 mm       15.528 22.624   40.650   65.789 79.365
240 mm       16.722 24.510   43.860   71.429 84.746
250 mm       17.301 25.381   45.455   74.627 87.719
260 mm       17.921 26.316   47.170   76.923 90.909
280 mm       19.157 28.090   50.505   81.967 98.039
300 mm       20.325 29.940   53.763   87.719 104.167
320 mm         31.646   56.818   92.593  
340 mm         33.557   60.241   98.039  
360 mm         35.211   63.291   104.167  
380 mm         37.037   66.667   108.696  
400 mm         39.063   69.444   113.636

Incoloy X750 Nuts Dimensions

Nominal Size or Basic Major Thread Diameter F G H
Width Across Flats Width Across Corners Thickness
Basic Max Min Max Min Basic Max Min
1/4 .2500 1/2 .500 .488 .577 .556 15/64 .250 .218
5/16 .3125 9/16 .562 .546 .650 .622 19/64 .314 .280
3/8 .3750 11/16 .688 .669 .794 .763 23/64 .377 .341
7/16 .4375 3/4 .750 .728 .866 .830 27/64 .441 .403
1/2 .5000 7/8 .875 .850 1.010 .969 31/64 .504 .464
9/16 .5625 15/16 .938 .909 1.083 1.037 35/64 .568 .526
5/8 .6250 1-1/16 1.062 1.031 1.227 1.175 39/64 .631 .587
3/4 .7500 1-1/4 1.250 1.212 1.443 1.382 47/64 .758 .710
7/8 .8750 1-7/16 1.438 1.394 1.660 1.589 55/64 .885 .833
1 1.0000 1-5/8 1.325 1.575 1.876 1.796 63/64 1.012 .956
1-1/8 1.1250 1-13/16 1.812 1.756 2.093 2.002 1-7/64 1.139 1.079
1-1/4 1.2500 2 2.000 1.938 2.309 2.209 1-7/32 1.251 1.187
1-3/8 1.3750 2-3/16 2.188 2.119 2.526 2.416 1-11/32 1.378 1.460
1-1/2 1.5000 2-3/8 2.375 2.300 2.742 2.622 1-15/32 1.505 1.433
1-5/8 1.6250 2-9/16 2.562 2.481 2.959 2.828 1-19/32 1.632 1.556
1-3/4 1.7500 2-3/4 2.750 2.662 3.175 3.035 1-23/32 1.759 1.679
2 2.0000 3-1/8 3.125 3.025 3.608 3.449 1-31/32 2.013 1.925
2-1/4 2.2500 3-1/2 3.500 3.388 4.041 3.862 2-13/64 2.251 2.155
2-1/2 2.5000 3-7/8 3.875 3.750 4.474 4.275 2-29/64 2.505 2.401
2-3/4 2.7500 4-1/4 4.250 4.112 4.907 4.688 2-45/64 2.759 2.647
3 3.0000 4-5/8 4.625 4.475 5.340 5.102 2-61/64 3.013 2.893
3-1/4 3.2500 5 5.000 4.838 5.774 5.515 3-3/16 3.252 3.124
3-1/2 3.5000 5-3/8 5.375 5.200 6.207 5.928 3-7/16 3.506 3.370
3-3/4 3.7500 5-3/4 5.750 5.562 6.640 6.341 3-11/16 3.670 3.616
4 4.0000 6-1/8 6.125 5.925 7.073 6.755 3-15/16 4.014 3.862

ASTM / DIN Specification of Inconel Fasteners

ASTM B166 ASTM B446 ASTM F2281
ASTM B166M ASTM B446M ASTM A962
ASTM A320 ASTM F593-13a ASTM A962M
ASTM A320M ASTM F594-15
DIN 580 DIN 6914 DIN 6921
DIN 582 DIN 3570 DIN 603
DIN 444 DIN 7990 DIN 2510
DIN 939 DIN 1B DIN 976
DIN 933 DIN 529 DIN 912
DIN 931 DIN 6325

Incoloy X750 Fasteners Standard

Hexagon Bolt / Set Screws Stud Bolt Hexagon Nuts Socket Cap screws
DIN 931 BS4882 DIN 934 DIN 912
DIN 933 DIN 976 BS 1768 DIN 6912
BS 1768 BS 1769 DIN 7984
UNI 5731 BS 1083 ANSI B18.3
UNI 5739 BS 3692 ISO 4762
ISO 4014 ISO 4032 UNI 5931
ISO 4017 ISO 4033 BS 2470
BS 1769 ANSI B18.2.2 BS 4168
BS 3692
ANSI B18.2.1
Socket & Slotted Set Screws Socket & Slotted Countersunk Screws Studs Washers
DIN 913 DIN 963 DIN 938 DIN 125
DIN 914 DIN 7991 DIN 939 DIN 9021
DIN 915 BS 4168 DIN 2510 BS 4320
DIN 916 BS 1981 BS 4439 BS 3410
DIN 551 BS 483 BS 2693
DIN 553 BS 2470 Spring Washers
DIN 438 DIN 127
BS 4168 BS 4464
BS 1802

Incoloy X750 Flat Washer Dimension Chart

Size Inside Diameter Outside Diameter Thickness
#2 3/32" 1/4" .020"
#4 1/8" 5/16" 1/32"
#8 3/16" 7/16" 3/64"
#10 7/32" 1/2" 3/64"
#6 5/32" 3/8" 3/64"
1/4 9/32" 5/8" 1/16"
3/8 13/32" 13/16" 1/16"
7/16 15/32" 59/64" 1/16"
1/2 17/32" 1-1/16" 3/32"
9/16 19/32" 1-3/16" 3/32"
5/16 11/32" 11/16" 1/16"
1-3/4 1-7/8" 4" 3/16"
5/8 21/32" 1-5/16" 3/32"
3/4 13/16" 1-1/2" 9/64"
7/8 15/16" 1-3/4" 9/64"
1" 1-1/16" 2" 9/64"
1-1/8 1-3/16" 2-1/4" 9/64"
1-1/4 1-5/16" 2-1/2" 5/32"
1-1/2 1-7/16" 3" 3/16"
1-5/8 1-3/4" 3-3/4" 3/16"
2 2-1/8" 4-1/2" 3/16"

Incoloy X750 Plain Washer Dimension

Size Inside Diameter Outside Diameter Thickness
3/16 1/4" 9/16" 3/64"
1/4 5/16" 3/4" 1/16"
3/8 7/16" 1" 5/64"
7/16 1/2" 1-1/4" 5/64"
1/2 9/16" 1-3/8" 7/64"
9/16 5/8" 1-1/2" 7/64"
5/8 11/16" 1-3/4" 9/64"
3/4 13/16" 2" 5/32"
5/16 3/8" 7/8" 5/64"
7/8 15/16" 2-1/4" 1/64"
1 1-1/16" 2-1/2" 11/64"
1-1/8 1-1/4" 2-3/4" 11/64"
1-1/4 1-3/8" 3" 11/64"
1-3/8 1-1/2" 3-1/4" 3/16"
1-5/8 1-3/4" 3-3/4" 3/16"
1-3/4 1-7/8" 4" 3/16"
2 2-1/8" 4-1/2" 3/16"
2-1/2 2-5/8" 4-1/2" 3/16"
3 3-1/8" 5-1/2" 9/32"
1-1/2 1-5/8" 3-1/2" 3/16"

Incoloy X750 Washers Sizes

Size USS SAE
Inside Diameter
(A)		 Outside Diameter
(B)		 Thickness
(C)		 Inside Diameter
(A)		 Outside Diameter
(B)		 Thickness
(C)
#2 - - - 3/32" 1/4" 0.020"
#4 - - - 1/8" 5/16" 0.032"
#6 - - - 5/32" 3/8" 0.049"
#8 - - - 3/16" 7/16" 0.049"
#10 - - - 7/32" 1/2" 0.049"
#12 - - - 1/4" 9/16" 0.065"
1/4" 5/16" 0.734" 0.065" 9/32" 5/8" 0.065"
5/16" 3/8" 7/8" 0.083" 11/32" 11/16" 0.065"
3/8" 7/16" 1" 0.083" 13/32" 13/16" 0.065"
7/16" 1/2" 1-1/4" 0.083" 15/32" 15/16" 0.065"
1/2" 9/16" 1-3/8" 0.109" 17/32" 1-1/16" 0.095"
9/16" 5/8" 1-15/32" 0.109" 19/32" 1-5/32" 0.095"
5/8" 11/16" 1-3/4" 0.134" 21/32" 1-5/16" 0.095"
3/4" 13/16" 2" 0.148" 13/16" 1-15/32" 0.134"
7/8" 15/16" 2-1/4" 0.165" 15/16" 1-3/4" 0.134"
1" 1-1/16" 2-1/2" 0.165" 1-1/16" 2" 0.134"
1-1/8" 1-1/4" 2-3/4" 0.165" - - -
1-1/4" 1-3/8" 3" 0.165" - - -
1-3/8" 1-1/2" 3-1/4" 0.180" - - -
1-1/2" 1-5/8" 3-1/2" 0.180" - - -
1-5/8" 1-3/4" 3-3/4" 0.180" - - -
1-3/4" 1-7/8" 4" 0.180" - - -
2" 2-1/8" 4-1/2" 0.213" - - -

Incoloy X750 Stud Bolt Size Chart

 Class 150 Flanges ASME B16.5 (Stud bolt sizes) Length of Stud Bolts 
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in		 Ring Joint
1/2 3 1/2 2 3/8 5/8 4 1/2 2 1/4 –
3/4 3 7/8 2 3/4 5/8 4 1/2 2 1/2 –
1 4 1/4 3 1/8 5/8 4 1/2 2 1/2 3
1 1/4 4 5/8 3 1/2 5/8 4 1/2 2 3/4 3 1/4
1 1/2 5 3 7/8 5/8 4 1/2 2 3/4 3 1/4
2 6 4 3/4 3/4 4 5/8 3 1/4 3 3/4
2 1/2 7 5 1/2 3/4 4 5/8 3 1/2 4
3 7 1/2 6 3/4 4 5/8 3 1/2 4
3 1/2 8 1/2 7 3/4 8 5/8 3 1/2 4
4 9 7 1/2 3/4 8 5/8 3 1/2 4
5 10 8 1/2 7/8 8 3/4 3 3/4 4 1/4
6 11 9 1/2 7/8 8 3/4 4 4 1/2
8 13 1/2 11 3/4 7/8 8 3/4 4 1/4 4 3/4
10 16 14 3/4 1 12 7/8 4 1/2 5
12 19 17 1 12 7/8 4 3/4 5 1/4
14 21 18 3/4 1 1/8 12 1 5 1/4 5 3/4
16 23 1/2 21 1/4 1 1/8 16 1 5 1/4 5 3/4
18 25 22 3/4 1 1/4 16 1 1/8 5 3/4 6 1/4
20 27 1/2 25 1 1/4 20 1 1/8 6 1/4 6 3/4
24 32 29 1/2 1 1/4 20 1 1/4 6 3/4 7 1/4
Class 300 Flanges ASME B16.5 Length of Stud Bolts 
NPS Outside Diameter of Flange The diameter of Bolt Circle The diameter of Bolt Holes Number of Bolts Diameter of Bolts Raised Face
0.06 in		 Ring Joint
1/2 3 3/4 2 5/8 5/8 4 1/2 2 1/2 3
3/4 4 5/8 3 1/4 3/4 4 5/8 3 3 1/2
1 4 7/8 3 1/2 3/4 4 5/8 3 3 1/2
1 1/4 5 1/4 3 7/8 3/4 4 5/8 3 1/4 3 3/4
1 1/2 6 1/8 4 1/2 7/8 4 3/4 3 1/2 4
2 6 1/2 5 3/4 8 5/8 3 1/2 4
2 1/2 7 1/2 5 7/8 7/8 8 3/4 4 4 1/2
3 8 1/4 6 5/8 7/8 8 3/4 4 1/4 4 3/4
3 1/2 9 7 1/4 7/8 8 3/4 4 1/4 5
4 10 7 7/8 7/8 8 3/4 4 1/2 5
5 11 9 1/4 7/8 8 3/4 4 3/4 5 1/4
6 12 1/2 10 5/8 7/8 12 3/4 4 3/4 5 1/2
8 15 13 1 12 7/8 5 1/2 6
10 17 1/2 15 1/4 1 1/8 16 1 6 1/4 6 3/4
12 20 1/2 17 3/4 1 1/4 16 1 1/8 6 3/4 7 1/4
14 23 20 1/4 1 1/4 20 1 1/8 7 7 1/2
16 25 1/2 22 1/2 1 3/8 20 1 1/4 7 1/2 8
18 28 24 3/4 1 3/8 24 1 1/4 7 3/4 8 1/4
20 30 1/2 27 1 3/8 24 1 1/4 8 8 3/4
24 36 32 1 5/8 24 1 1/2 9 10

Incoloy X750 Stud Bolt Torque Chart

Flange
Size		 B16.5 Class 150 RF/ Ring Gaskets B16.5 Class 150 FF/ Full Face Gaskets
Torque / Round (ft-lbs) Stud Bolts Tighten Sequence Torque / Round (ft-lbs) Stud Bolts Tighten Sequence
1st 2nd Final Dwg/No. Bolt Size 1st 2nd Final Dwg*/No. Bolt Size
1/2″ 10 20 30 4-bolt 1/2″ 20 40 60 4-bolt 1/2″
3/4″ 13 27 40 4-bolt 1/2″ 20 40 60 4-bolt 1/2″
1″ 15 30 50 4-bolt 1/2″ 20 40 60 4-bolt 1/2″
1-1/4″ 20 40 60 4-bolt 1/2″ 20 40 60 4-bolt 1/2″
1-1/2″ 20 40 60 4-bolt 1/2″ 20 40 60 4-bolt 1/2″
2″ 40 80 120 4-bolt 5/8″ 40 80 120 4-bolt 5/8″
2-1/2″ 40 80 120 4-bolt 5/8″ 40 80 120 4-bolt 5/8″
3″ 40 80 120 4-bolt 5/8″ 40 80 120 4-bolt 5/8″
3-1/2″ 40 80 120 8-bolt 5/8″ 40 80 120 8-bolt 5/8″
4″ 40 80 120 8-bolt 5/8″ 40 80 120 8-bolt 5/8″
5″ 60 120 200 8-bolt 3/4″ 60 120 200 8-bolt 3/4″
6″ 60 120 200 8-bolt 3/4″ 60 120 200 8-bolt 3/4″
8″ 60 120 200 8-bolt 3/4″ 60 120 200 8-bolt 3/4″
10″ 95 190 320 12-bolt 7/8″ 95 190 320 12-bolt 7/8″
12″ 95 190 320 12-bolt 7/8″ 95 190 320 12-bolt 7/8″
14″ 147 294 490 12-bolt 1″ 147 294 490 12-bolt 1″
16″ 147 294 490 16-bolt 1″ 147 294 490 16-bolt 1″
18″ 213 426 710 16-bolt 1-1/8″ 213 426 710 16-bolt 1-1/8″
20″ 213 426 710 20-bolt 1-1/8″ 213 426 710 20-bolt 1-1/8″
24″ 300 1,000 20-bolt 1-1/4″ 300 1,000 20-bolt 1-1/4″

ANSI and/or ASME Standards Inconel Fasteners(inch series)

ASME B18.1.1 Small Solid Rivets ASME B18.8.1 Clevis Pins and Cotter Pins
ASME B18.1.2 Large Rivets ASME B18.8.2 Taper Pins, Dowel Pins, Straight Pins, Grooved Pins and Spring Pins
ASME B18.2.1 Square and Hex Bolts and Screws ASME B18.9 Plow Bolts
ASME B18.2.2 Square and Hex Nuts ASME B18.10 Track Bolts and Nuts
ASME B18.2.6 Fasteners for use in Structural Applications ASME B18.11 Miniature Screws
ASME B18.3 Socket Cap, Shoulder and Set Screws ASME B18.13 Screws and Washer Assemblies (Sems)
ASME B18.5 Round Head Bolts ASME B18.15 Forged Eyebolts
ASME B18.6.2 Slotted Head Cap Screws, Square Head Set Screws, and Slotted Headless Set Screws ASME B18.17 Wing Nuts, Thumb Screws and Wing Screws
ASME B18.6.3 Machine Screws and Machine Screws Nuts ASME B18.21.1 Lock Washers
ASME B18.6.4 Thread Forming and Thread Cutting Tapping Screws and Metallic Drive Screws ASME B18.22.1 Plain Washers
ASME B18.7 General Purpose Semi- Tubular Rivets, Full Tubular Rivets, Split Rivets and Rivet Caps ASME B18.23.1 Beveled Washers

Other Types of Incoloy X750 Fasteners

Incoloy UNS N07750 Thread Rolling Screw Incoloy Alloy X750 Construction screws
Inconel Alloy X750 Thread Cutting Screw Inconel UNS N07750 Countersunk Washer
ASTM B166 Incoloy X750 Tooth Lock Washer ASME SB166 Alloy X750 Ogee Washer
Incoloy X750 Hex Washers X750 Incoloy Split / Lock Washer Supplier
Nickel Alloy X750 Hexagonal Washer t Best Price Incoloy X750 Self Locking Nuts
Incoloy® Alloy X750 Square Washer Dealer Nickel Incoloy X750 Fasteners Stockist
Incoloy X750 Fasteners Supplier in Mumbai Alloy X750 Fasteners Manufacturer in India
X750 Incoloy Dock Washer Incoloy DIN 2.4669 Customized Washer
ASTM SB166 Incoloy Alloy X750 Fasteners ASME SB166 Alloy X750 Fender Washer
Incoloy DIN 2.4669 Hanger Bolt Supplier Suppliers of Incoloy X750 Draw Bolt

We Have 15+ Years Industrial Experiences
Call Us & get a quote! +91-9987673092