Inconel 600 Stud Bolts
Inconel 600 Tap End Stud Bolts, Inconel Alloy 600 Stud Half Thread Bolts, Inconel UNS N06600 Double Ended Stud, ASTM A166 Alloy 600 Double Ended Stud Suppliers in India.
Ranfit Metal & Alloys is a prominent supplier and distributor of Inconel 600 Stud Bolts, which has useful resistance to dry gases at moderately elevated temperatures. Inconel UNS N06600 Stud Bolts is a Nickel-Chromium alloy with good resistance to oxidation and corrosion at high temperatures. With high nickel content, Inconel WNR 2.4816 Stud Bolts is virtually immune to chloride-induced SCC, and is also non-magnetic along with resistant to a wide range of corrosive materials. Application of Nickel-Alloy 600 Stud Bolts is useful in the chemical, pulp and paper, and is also used for furnace components, in chemical and food processing. A widely used thermocouple sheath material in carbon or nitrogen rich atmospheres, Alloy 600 Stud Bolts continues in use as an excellent muffle construction material and is also used for jigs and fixtures in heat treatment processes.
Inconel N06600 Stud Bolts was designed to resist deformation at high temperatures, hence it is difficult to forge and the temperature range in which it may be safely forged is narrow. Incoloy 600 Stud Bolts retains strength over a wide temperature range, attractive for high temperature applications where aluminum and steel would succumb to creep as a result of thermally induced crystal vacancies. The high nickel content of DIN 2.4816 Stud Bolts provides a level of resistance to reducing environments, while the chromium content of the material provides resistance to weaker oxidizing environments.
ASME SB166 SS Inconel 600 Threaded Rod, Alloy 600 Hex Studs, Nickel Alloy 600 Threaded Stud Bolts, Inconel DIN 2.4816 Tie Rod Supplier & Exporter in India.
Inconel 600 Stud Bolts Specification
| Grade | Inconel 600 (UNS N06600) |
|---|---|
| ASTM/ASME Specifications | ASTM B 166 / ASME SB 166 |
| Inconel 600 Stud Bolt size | M02 to M33, Custom Sizes |
| Inconel 600 Stud Bolts Length | 3 mm to 200 mm |
| Inconel 600 Stud Bolt | UNF, BSW, BSF, METRIC, UNC, or as required |
| Standard of Stud Bolts | DIN 525, DIN 835, DIN 938, DIN 939, DIN 940, DIN 949-1, DIN 949-2, DIN 975, DIN 976, DIN 2509, BS 2693, BS 3692, BS 4439, IS 1862, IS 13218, ANSI/ASME B18.31.2, ANSI/ASME B16.5 |
| Form of Inconel 600 Stud Bolts | Hex, Threading, Square, Round as per Gauge Etc. |
| Raw materials Source | JSPL, Mukund Steel, Tata Steel, Dhamm Steel, Usha Martin, etc. |
| Inconel 600 Threads Configuration | ASME B1.1 2A/3A – 2B/3B Inch Unified Threads and B1.13M 6h-6G Metric Coarse Threads |
| Certification | Dual Certified As per ASTM & ASME Codes |
| Popular Types of Stud Bolt | Stud Bolts, Fully Threaded Stud Bolts, Tap End Stud Bolts, Double End Stud Bolts, Stud Bolts with Reduced Shank, Reduced Shank, Flange Stud Bolts, Flange Bolting, Weld Studs |
| Inconel 600 Threads | Unless otherwise specified, the threads shall be rolled or cut and tapped horizontally or vertically |
| Test Certificate of Stud Bolts | as per EN 10204 / 3.1 Manufacturer Test Certificate |
| Additional Certifications | PED 97/23/EC Certified, Merkblatt AD 2000 W2 Certified |
| Production process | M24-M100: hot forging, M2-M24: Cold Froging, for custom-made connecting element machining and CNC |
| Head drive of Stud Bolts | Six-Lobe, Phillips, Phillips/Slot, Slotted etc |
| Packing of Stud Bolts | IN BULK: canton, pallet, Small Boxs / carton / pallet, or customer request |
| Surface Coating | Ptfe Coated Stud Bolts Phosphate Coating Teflon Coating Zinc Coating Hot Dipped Galvanizing Coating Cadmium Coating Xylon Coating |
| Stud Bolts finishing | Coatings & Finishes : Self-Colour, Passivated, Bright Zinc Plated (BZP), Hot Dip Galvanised (HDG), Sherardized, some special one like DACROMET Geometry and Mechanically Applied coating ,Dacroment, nickel plated, anodizing, plated zinc-nickel Zinc (blue, black, yellow, white), black oxide, |
Inconel 600 Stud Bolt Equivalent Grades
| Alloy Grade | Common Name | Related Specification | |||
| British | European | ASTM | UNS | ||
| Inconel Alloy 600 | Inconel 600 ® | BS 3076 NA 14 | 2.4816 | B166 | N06600 |
Chemical Composition of Inconel 600 Stud Bolt
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr |
| Inconel 600 | 0.15 max | 1.00 max | 0.50 max | 0.015 max | 0.50 max | 6.00 – 10.00 | 72.00 min | 14.00 – 17.00 |
Mechanical Properties of Inconel 600 Stud Bolt
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.47 g/cm3 | 1413 °C (2580 °F) | 655 MPa, 95000 psi | 310 MPa, 45000 psi | 45 % |
Types of Inconel 600 Stud Bolt
Inconel 600 Tap End Stud Bolts
Inconel 600 Double End Stud Bolt
Inconel 600 Fully Threaded Stud Bolts
Inconel 600 Stud Bolts with Reduced Shank
Inconel 600 Flange Stud Bolts
Inconel 600 Tie Bar
Inconel 600 Wheel Lug Stud Bolt
Inconel 600 Reduced Shank
Inconel 600 Weld Studs
Inconel 600 Stud Bolt Forms & Availability
| Products | Size | |
|---|---|---|
| Inconel 600 Fully Threaded Stud Bolts | Inconel 600 Tap End Stud Bolts | M02 to M33, Custom Sizes |
| Inconel 600 Double End Stud Bolts | Inconel 600 Stud Bolts with Reduced Shank | |
| Inconel 600 Reduced Shank | Inconel 600 Flange Stud Bolts | |
| Inconel 600 Flange Bolting | Inconel 600 Weld Studs | |
| Inconel 600 Threaded Stud Bolts | Inconel 600 Threaded Studs | |
| Inconel 600 Continuous Thread Stud Bolt | Inconel 600 Partial Threaded Stud Bolt | |
| Inconel 600 Reduced Shank Stud Bolt | Inconel 600 Allen Heavy Stud Bolts | |
ANSI And/Or ASME Standards Stud Bolt (Inch Series)
| Description | Standard | Measurement System |
|---|---|---|
| Continuous Thread Stud Bolts | ANSI/ASME B18.31.2 | Inch Series |
| Stud Bolts with Chamfered End for Flange Bolting | ANSI/ASME B16.5 | Inch Series |
| Welding Studs / Weld Studs | DIN 525 | Metric |
| Double End Stud Bolts / Double Ended Studs | DIN 835 | Metric |
| Double End Stud Bolts with Thread Engagement Length Equals to 1 x Diameter | DIN 938 | Metric |
| Double End Stud Bolts with Thread Engagement Length Equals to 1.25 x Diameter | DIN 939 | Metric |
| Double End Stud Bolts with Thread Engagement Length Equals to 2.5 x Diameter | DIN 940 | Metric |
| Double End Studs With Thread Engagement Length Equals to 2D | DIN 949-1 | Metric |
| Double End Studs With Thread Engagement Length Equals to 2.5D | DIN 949-2 | Metric |
| Plain End Stud Bolts / Threaded Rods | DIN 975 | Inch Series |
| Plain End Stud Bolts / Threaded Rods | DIN 976 | Metric |
| Double End Studs / Stud Bolts | DIN 2509 | Metric |
| Double End Stud Bolts With Reduced Shank | DIN 2510 L, DIN 2510 Z, DIN 2510 K, DIN 2510 ZU/KU, DIN 2510 GP, DIN 2510 GQ, DIN 2510 GR, DIN 2510 GS, DIN 2510 HP | Metric |
| Studs / Stud Bolts | BS 2693 | Inch Series |
| Stud Bolts | BS 3692 | Metric |
| Double End Stud Bolts With Thread Engagement Length Equals to 1.5 x Diameter | BS 4439 | Metric |
| Stud Bolts | IS 1862 | Metric |
| Clamping Studs | IS 13218 | Metric |
Property Class
| For Bolts & Screws | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H |
| For Nuts | A2-70, A2-80, A4-70, A4-80, F594C, F594D, F594G, F594H, A2-035, A4-040 |
| For SHCS | F837B, F837C, F837E, F837 |
| For Threaded Rods | A2-70, A2-80, A4-70, A4-80, F593C, F593D, F593G, F593H, B8, B8M CL1 & CL2 |
Inconel 600 Stud Bolt Size Chart
| Class 150 Flanges ASME B16.5 (Stud bolt sizes) | Length of Stud Bolts | |||||||
|---|---|---|---|---|---|---|---|---|
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
| 1/2 | 3 1/2 | 2 3/8 | 5/8 | 4 | 1/2 | 2 1/4 | – | |
| 3/4 | 3 7/8 | 2 3/4 | 5/8 | 4 | 1/2 | 2 1/2 | – | |
| 1 | 4 1/4 | 3 1/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 1 1/4 | 4 5/8 | 3 1/2 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 1 1/2 | 5 | 3 7/8 | 5/8 | 4 | 1/2 | 2 3/4 | 3 1/4 | |
| 2 | 6 | 4 3/4 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 2 1/2 | 7 | 5 1/2 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 | 7 1/2 | 6 | 3/4 | 4 | 5/8 | 3 1/2 | 4 | |
| 3 1/2 | 8 1/2 | 7 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 4 | 9 | 7 1/2 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 5 | 10 | 8 1/2 | 7/8 | 8 | 3/4 | 3 3/4 | 4 1/4 | |
| 6 | 11 | 9 1/2 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 8 | 13 1/2 | 11 3/4 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 10 | 16 | 14 3/4 | 1 | 12 | 7/8 | 4 1/2 | 5 | |
| 12 | 19 | 17 | 1 | 12 | 7/8 | 4 3/4 | 5 1/4 | |
| 14 | 21 | 18 3/4 | 1 1/8 | 12 | 1 | 5 1/4 | 5 3/4 | |
| 16 | 23 1/2 | 21 1/4 | 1 1/8 | 16 | 1 | 5 1/4 | 5 3/4 | |
| 18 | 25 | 22 3/4 | 1 1/4 | 16 | 1 1/8 | 5 3/4 | 6 1/4 | |
| 20 | 27 1/2 | 25 | 1 1/4 | 20 | 1 1/8 | 6 1/4 | 6 3/4 | |
| 24 | 32 | 29 1/2 | 1 1/4 | 20 | 1 1/4 | 6 3/4 | 7 1/4 | |
| Class 300 Flanges ASME B16.5 | Length of Stud Bolts | |||||||
| NPS | Outside Diameter of Flange | The diameter of Bolt Circle | The diameter of Bolt Holes | Number of Bolts | Diameter of Bolts | Raised Face 0.06 in |
Ring Joint | |
| 1/2 | 3 3/4 | 2 5/8 | 5/8 | 4 | 1/2 | 2 1/2 | 3 | |
| 3/4 | 4 5/8 | 3 1/4 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 | 4 7/8 | 3 1/2 | 3/4 | 4 | 5/8 | 3 | 3 1/2 | |
| 1 1/4 | 5 1/4 | 3 7/8 | 3/4 | 4 | 5/8 | 3 1/4 | 3 3/4 | |
| 1 1/2 | 6 1/8 | 4 1/2 | 7/8 | 4 | 3/4 | 3 1/2 | 4 | |
| 2 | 6 1/2 | 5 | 3/4 | 8 | 5/8 | 3 1/2 | 4 | |
| 2 1/2 | 7 1/2 | 5 7/8 | 7/8 | 8 | 3/4 | 4 | 4 1/2 | |
| 3 | 8 1/4 | 6 5/8 | 7/8 | 8 | 3/4 | 4 1/4 | 4 3/4 | |
| 3 1/2 | 9 | 7 1/4 | 7/8 | 8 | 3/4 | 4 1/4 | 5 | |
| 4 | 10 | 7 7/8 | 7/8 | 8 | 3/4 | 4 1/2 | 5 | |
| 5 | 11 | 9 1/4 | 7/8 | 8 | 3/4 | 4 3/4 | 5 1/4 | |
| 6 | 12 1/2 | 10 5/8 | 7/8 | 12 | 3/4 | 4 3/4 | 5 1/2 | |
| 8 | 15 | 13 | 1 | 12 | 7/8 | 5 1/2 | 6 | |
| 10 | 17 1/2 | 15 1/4 | 1 1/8 | 16 | 1 | 6 1/4 | 6 3/4 | |
| 12 | 20 1/2 | 17 3/4 | 1 1/4 | 16 | 1 1/8 | 6 3/4 | 7 1/4 | |
| 14 | 23 | 20 1/4 | 1 1/4 | 20 | 1 1/8 | 7 | 7 1/2 | |
| 16 | 25 1/2 | 22 1/2 | 1 3/8 | 20 | 1 1/4 | 7 1/2 | 8 | |
| 18 | 28 | 24 3/4 | 1 3/8 | 24 | 1 1/4 | 7 3/4 | 8 1/4 | |
| 20 | 30 1/2 | 27 | 1 3/8 | 24 | 1 1/4 | 8 | 8 3/4 | |
| 24 | 36 | 32 | 1 5/8 | 24 | 1 1/2 | 9 | 10 | |
Inconel 600 Double Ended Stud Bolts Weights
| Metric Studs Bolts Weights | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| STUD BOLT LENGTH (in mm) | M10 | M12 | M14 | M16 | M20 | M22 | M24 | M30 | M36 | M39 |
| 60 | 5,6 | 8,1 | 12 | 15,6 | ||||||
| 70 | 6,1 | 8,9 | 13 | 16,9 | ||||||
| 80 | 6,6 | 9,6 | 14 | 18,2 | 32,5 | |||||
| 90 | 7,1 | 10,3 | 15 | 19,6 | 34,5 | 45,5 | ||||
| 100 | 7,6 | 11 | 16 | 21 | 36,7 | 47,2 | 54,2 | |||
| 110 | 8,1 | 11,7 | 17 | 22,2 | 38,7 | 48,3 | 58,2 | |||
| 150 | 10,1 | 14,9 | 20,8 | 27,5 | 46,9 | 58,5 | 69,2 | 121 | 192 | 237 |
| 160 | 10,6 | 15,6 | 21,8 | 29,1 | 49 | 61 | 72,2 | 126 | 199 | 245 |
| 170 | 16,4 | 22,8 | 30,4 | 51,1 | 63,5 | 75,2 | 130 | 206 | 253 | |
| 200 | 34,5 | 56,2 | 71 | 84 | 144 | 226 | 278 | |||
| 210 | 35,8 | 58,5 | 73,5 | 88,4 | 149 | 233 | 286 | |||
| 230 | 38,5 | 62,6 | 78,6 | 94,4 | 159 | 247 | 302 | |||
| 240 | 39,8 | 64,7 | 81,2 | 97,4 | 164 | 253 | 310 | |||
| 250 | 41,1 | 66,8 | 83,7 | 100,4 | 172 | 260 | 319 | |||
| 260 | 68,8 | 86,3 | 103,4 | 177 | 267 | 327 | ||||
| 270 | 70,9 | 88,8 | 106,4 | 182 | 274 | 335 | ||||
| 280 | 73 | 91,4 | 109,4 | 187 | 281 | 343 | ||||
| 290 | 75 | 93,9 | 112,4 | 192 | 291 | 360 | ||||
| 300 | 77,1 | 96,5 | 115,4 | 196 | 298 | 368 | ||||
| 320 | 101,6 | 121,3 | 206 | 312 | 380 | |||||
| 360 | 133,3 | 224 | 340 | 411 | ||||||
| 380 | 234 | 353 | 428 | |||||||
| 400 | 243 | 367 | 444 | |||||||
| 420 | 252 | 381 | 460 | |||||||
| 460 | 271 | 408 | 493 | |||||||
| 480 | 281 | 422 | 509 | |||||||
| 500 | 290 | 436 | 526 | |||||||
| Imperial Weight Chart | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| STUD BOLT LENGTH (in mm) | M10 | M12 | M14 | M16 | M20 | M22 | M24 | M30 | M36 | M39 |
| 60 | 5,6 | 8,1 | 12 | 15,6 | ||||||
| 70 | 6,1 | 8,9 | 13 | 16,9 | ||||||
| 80 | 6,6 | 9,6 | 14 | 18,2 | 32,5 | |||||
| 90 | 7,1 | 10,3 | 15 | 19,6 | 34,5 | 45,5 | ||||
| 100 | 7,6 | 11 | 16 | 21 | 36,7 | 47,2 | 54,2 | |||
| 110 | 8,1 | 11,7 | 17 | 22,2 | 38,7 | 48,3 | 58,2 | |||
| 150 | 10,1 | 14,9 | 20,8 | 27,5 | 46,9 | 58,5 | 69,2 | 121 | 192 | 237 |
| 160 | 10,6 | 15,6 | 21,8 | 29,1 | 49 | 61 | 72,2 | 126 | 199 | 245 |
| 170 | 16,4 | 22,8 | 30,4 | 51,1 | 63,5 | 75,2 | 130 | 206 | 253 | |
| 200 | 34,5 | 56,2 | 71 | 84 | 144 | 226 | 278 | |||
| 210 | 35,8 | 58,5 | 73,5 | 88,4 | 149 | 233 | 286 | |||
| 230 | 38,5 | 62,6 | 78,6 | 94,4 | 159 | 247 | 302 | |||
| 240 | 39,8 | 64,7 | 81,2 | 97,4 | 164 | 253 | 310 | |||
| 250 | 41,1 | 66,8 | 83,7 | 100,4 | 172 | 260 | 319 | |||
| 260 | 68,8 | 86,3 | 103,4 | 177 | 267 | 327 | ||||
| 270 | 70,9 | 88,8 | 106,4 | 182 | 274 | 335 | ||||
| 280 | 73 | 91,4 | 109,4 | 187 | 281 | 343 | ||||
| 290 | 75 | 93,9 | 112,4 | 192 | 291 | 360 | ||||
| 300 | 77,1 | 96,5 | 115,4 | 196 | 298 | 368 | ||||
| 320 | 101,6 | 121,3 | 206 | 312 | 380 | |||||
| 360 | 133,3 | 224 | 340 | 411 | ||||||
| 380 | 234 | 353 | 428 | |||||||
| 400 | 243 | 367 | 444 | |||||||
| 420 | 252 | 381 | 460 | |||||||
| 460 | 271 | 408 | 493 | |||||||
| 480 | 281 | 422 | 509 | |||||||
| 500 | 290 | 436 | 526 | |||||||
Inconel 600 Stud Bolt Torque Chart
| Flange Size |
B16.5 Class 150 RF/ Ring Gaskets | B16.5 Class 150 FF/ Full Face Gaskets | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Torque / Round (ft-lbs) | Stud Bolts Tighten Sequence | Torque / Round (ft-lbs) | Stud Bolts Tighten Sequence | |||||||
| 1st | 2nd | Final | Dwg/No. | Bolt Size | 1st | 2nd | Final | Dwg*/No. | Bolt Size | |
| 1/2″ | 10 | 20 | 30 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
| 3/4″ | 13 | 27 | 40 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
| 1″ | 15 | 30 | 50 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
| 1-1/4″ | 20 | 40 | 60 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
| 1-1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ | 20 | 40 | 60 | 4-bolt | 1/2″ |
| 2″ | 40 | 80 | 120 | 4-bolt | 5/8″ | 40 | 80 | 120 | 4-bolt | 5/8″ |
| 2-1/2″ | 40 | 80 | 120 | 4-bolt | 5/8″ | 40 | 80 | 120 | 4-bolt | 5/8″ |
| 3″ | 40 | 80 | 120 | 4-bolt | 5/8″ | 40 | 80 | 120 | 4-bolt | 5/8″ |
| 3-1/2″ | 40 | 80 | 120 | 8-bolt | 5/8″ | 40 | 80 | 120 | 8-bolt | 5/8″ |
| 4″ | 40 | 80 | 120 | 8-bolt | 5/8″ | 40 | 80 | 120 | 8-bolt | 5/8″ |
| 5″ | 60 | 120 | 200 | 8-bolt | 3/4″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
| 6″ | 60 | 120 | 200 | 8-bolt | 3/4″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
| 8″ | 60 | 120 | 200 | 8-bolt | 3/4″ | 60 | 120 | 200 | 8-bolt | 3/4″ |
| 10″ | 95 | 190 | 320 | 12-bolt | 7/8″ | 95 | 190 | 320 | 12-bolt | 7/8″ |
| 12″ | 95 | 190 | 320 | 12-bolt | 7/8″ | 95 | 190 | 320 | 12-bolt | 7/8″ |
| 14″ | 147 | 294 | 490 | 12-bolt | 1″ | 147 | 294 | 490 | 12-bolt | 1″ |
| 16″ | 147 | 294 | 490 | 16-bolt | 1″ | 147 | 294 | 490 | 16-bolt | 1″ |
| 18″ | 213 | 426 | 710 | 16-bolt | 1-1/8″ | 213 | 426 | 710 | 16-bolt | 1-1/8″ |
| 20″ | 213 | 426 | 710 | 20-bolt | 1-1/8″ | 213 | 426 | 710 | 20-bolt | 1-1/8″ |
| 24″ | 300 | 600 | 1,000 | 20-bolt | 1-1/4″ | 300 | 600 | 1,000 | 20-bolt | 1-1/4″ |
Inconel 600 Stud Bolts Dimension
| Diameter | Diameter in mm | Diameter in inch | Nut Sizes |
|---|---|---|---|
| M12 | 12 | 0.4724 | 19 |
| M10 | 10 | 0.3937 | 17 |
| M14 | 14 | 0.5512 | 22 |
| M18 | 18 | 0.7087 | 27 |
| M16 | 16 | 0.6299 | 24 |
| M20 | 20 | 0.7874 | 30 |
| M24 | 24 | 0.9449 | 36 |
| M22 | 22 | 0.8661 | 32 |
| M27 | 27 | 1.063 | 41 |
| M33 | 33 | 1.2992 | 50 |
| M30 | 30 | 1.1811 | 46 |
| M36 | 36 | 1.4173 | 55 |
| M42 | 42 | 1.6535 | 65 |
| M39 | 39 | 1.5354 | 60 |
| M45 | 45 | 1.7717 | 70 |
| M52 | 52 | 2.0472 | 80 |
| M48 | 48 | 1.8898 | 75 |
| M56 | 56 | 2.2047 | 85 |
| M64 | 64 | 2.5197 | 95 |
| M60 | 60 | 2.3622 | 90 |
| M68 | 68 | 2.6772 | 100 |
| M76 | 76 | 2.9921 | 110 |
| M72 | 72 | 2.8346 | 105 |
| M80 | 80 | 3.1496 | 115 |
| M90 | 90 | 3.5433 | 130 |
| M85 | 85 | 3.3464 | 120 |
| M100 | 100 | 3.937 | 145 |
| M160 | 160 | 6.2992 | 230 |
| M125 | 125 | 4.9212 | 180 |
| M110 | 110 | 4.3307 | 155 |
| M140 | 140 | 5.5118 | 200 |
Other Types of Inconel 600 Stud Bolts
| Inconel DIN 2.4816 Threaded Stud | 600 Inconel Alloy Class A Double Ended Stud |
| 600 Inconel Alloy MS Stud Bolts | Inconel DIN 2.4816 Metric Thread Stud Bolt |
| Alloy 600 Threaded Stud | Inconel® Alloy 600 Stud Half Thread Bolts |
| Inconel® Alloy 600 Hex Studs | Alloy 600 Flange Stud Bolts |
| Nickel Ally 600 Stud Bolts | Inconel UNS N06600 Hex Head Stud Bolts |
| Inconel UNS N06600 Export Quality Stud Bolts | Nickel Ally 60 Heavy Stud Bolts |
| Inconel BS 3076 NA 14 Heavy Stud Bolts | ASTM B166 Alloy 600 Stud Bolts |
| ASTM B166 Alloy 600 Half Threaded Stud Bolts | Inconel BS 3076 NA 14 Stud Bolts |
| Inconel NCF 600 Single End Stud Bolts | ASME SB166 600 Inconel Hex Bolts |
| ASME SB166 Inconel 600 Threaded Stud Bolts | Inconel NCF 600 Tension Control Bolt |